source: vis_dev/vis-2.1/xsimv @ 14

#!/bin/sh
# The next line restarts using expectk \
exec expectk "$0" "$@"

#***********
#  The comments with the code here are meant to address the details of the
#  code itself, not the functionality of XsimView.  Refer to the XsimView's 
#  man page for a discussion of functionality.
#
#  The overall algorithm of XsimView is described at the bottom of the code
#  below where the "main" of XsimView is given.  The anciliary procedures 
#  are desribed in turn below.
#-----------


#**********
# source     fileSelect.src
#
# why:       fileSelect provides the ability to save files.  Here, it
#            is used to allow the user to select a filename so that in.simv,
#            the temporary file used for output, can be saved to whatever
#            name they desire.

# All from fileSelect.src
# Begins the file loading process.  Can take one argument, fileName
# which would specify the file being loaded, in which case,
# fileSelect process is skipped and the file is directly loaded.
proc loadFile {{file {}} {type {}}} {
        global globals
        set globals(optList) {}
        # if file is empty, ask user for new file, if still empty, exit
        # since they must have hit cancel or something else went wrong
        if {$file == {}} {set file [fileSelect Load]}
        if {$file == {}} {return}

        # if type is nil, then 
        # find the final letters after last . to get file type
        if {$type == {}} {
                set type [string range [file extension $file] 1 end]
        }
        if {$globals(options)} {
                switch -- $type {
                        mv              {set globals(optList) \
                                                [optionRead $globals(read_blif_mvOptions)]}
                        blif    {set globals(optList) \
                                                [optionRead $globals(read_blifOptions)]}
                        vl              {set globals(optList) \
                                                [optionRead $globals(read_verilogOptions)]}
                        fair    {set globals(optList) \
                                                [optionRead $globals(read_fairnessOptions)]}
                        ctl     {set globals(optList) \
                                                [optionRead $globals(model_checkOptions)]}
                }
        }
        switch -- $type {
                mv              {Send "rlmv $globals(optList) $file"}
                blif    {Send "read_blif $file"}
                vl              {Send "read_verilog $file"}
                fair    {Send "read_fairness $file"}
                ctl     {Send "model_check $file"}
                default {loadFile "$file [giveFileType $file]"}
        }
}

proc writeFile {{file {}} {type {}}} {
        global globals
        set globals(optList) {}
        # if file is empty, ask user for filename to write to.
        # If still empty, then they must have hit cancel or something
        if {$file == {}} {set file [fileSelect Write]}
        if {$file == {}} {return}

        # find the final letters after last . to get file type
        set type [string range [file extension $file] 1 end]
        if {$globals(options)} {
                switch -- $type {
                        mv              {set globals(optList) \
                                                [optionRead $globals(write_blif_mvOptions)]}
                        blif    {set globals(optList) \
                                                [optionRead $globals(austin_write_blifOptions)]}
                }
        }
        switch -- $type {
                        mv              {Send "write_blif_mv $globals(optList) $file"}
                        blif    {Send "austin_write_blif $globals(optList) $file"}
                        default {writeFile "$file.[giveFileType $file]"}
        }
}

proc giveFileType {file} {
        global temp globals
        toplevel .q
        set gFTDone 0

        wm title .q "What type of file?"
        set short [string range $file [expr [string last / $file] + 1] end]
        message .q.msg -text "What type is $short ?"
        pack .q.msg -side top
        bind .q <Return> {set gFTDone 1}

        # Set up radio buttons for type of file to load
        frame .q.radio
        foreach type {{blif blif} {blif_mv mv}  {verilog vl} {fairness fair}} {
                radiobutton .q.radio.[lindex $type 1] -variable temp \
                        -text [lindex $type 0] -value [lindex $type 1]
                pack .q.radio.[lindex $type 1] -side top
        }
        pack .q.radio -side top

        # Create the OK button
        # The OK button has a rim to indicate it is the default
        frame .q.button -bd 10
        frame .q.button.ok -bd 2 -relief sunken
        button .q.button.ok.b -text OK -command {set gFTDone 1}
        pack .q.button.ok.b
        pack .q.button.ok -side top
        pack .q.button -side top

        tkwait variable gFTDone
        destroy .q
        return $temp
}

proc fileSelect {why {default {}}} {
        global fileSelect globals
        set globals(options) 0
        set fileSelect(why) $why
        catch {destroy .fileSelect}
        set t [toplevel .fileSelect -bd 4]

        wm title $t $why
        message $t.msg -aspect 1000 -text $why
        pack $t.msg -side top -fill x

        # Create a read_only entry for the current pwd
        set fileSelect(dirEnt) [entry $t.dir -width 15 \
                -relief flat -state disabled]
        pack $t.dir -side top -fill x

        # Create an entry for the pathname
        # The value is kept in the fileSelect(path)
        frame $t.top
        label $t.top.l -text "File:" -padx 0
        set e [entry $t.top.path -relief sunken -textvariable fileSelect(path)]
        pack $t.top -side top -fill x
        pack $t.top.l -side left
        pack $t.top.path -side right -fill x -expand true
        set fileSelect(pathEnt) $e

        # Use $e to set up bindings for entry widget
        bind $e <Return> fileSelectOK
        bind $e <Control-c> fileSelectCancel
        bind $e <space> fileSelectComplete
        focus $e

        # Create a listbox to hold the directory contents
        listbox $t.list -yscrollcommand [list $t.scroll set]
        scrollbar $t.scroll -command [list $t.list yview]
        # A single click copies the name into the entry
        # A double-click selects the name
        bind $t.list <Button-1> {fileSelectClick %y}
        bind $t.list <Double-Button-1> {
                fileSelectClick %y;
                fileSelectOK
        }

        # Create the OK and cancel buttons and options button
        # The OK button has a rim to indicate it is the default
        frame $t.buttons -bd 10
        frame $t.buttons.ok -bd 2 -relief sunken
        button $t.buttons.ok.b -text OK -command fileSelectOK
        button $t.buttons.cancel -text Cancel -command fileSelectCancel
        checkbutton $t.buttons.options -text "Choose Options" \
                -variable globals(options)

        # Pack the list, scrollbar and button box
        # in a horizontal stack below the upper widgets
        pack $t.list -side left -fill both -expand true
        pack $t.scroll -side left -fill both
        pack $t.buttons -side left -fill both
        pack $t.buttons.ok $t.buttons.cancel $t.buttons.options -side top \
                -padx 10 -pady 5
        pack $t.buttons.ok.b -padx 4 -pady 4

        # Initialize variables in the directory
        set fileSelect(path) {}
        set dir [pwd]

        set fileSelect(dir) {}
        set fileSelect(done) 0

        # Wait for the listbox to be visible so we
        # can provide feedback during the listing
        tkwait visibility .fileSelect.list
        fileSelectList $dir

        tkwait variable fileSelect(done)
        destroy .fileSelect
        return $fileSelect(path)
}

# Creates the list of dirs and files to put into the listbox, if not given
proc fileSelectList { dir {files {}} } {
        global fileSelect

        # Update the directory
        set e $fileSelect(dirEnt)
        $e config -state normal
        $e delete 0 end
        $e insert 0 $dir
        $e config -state disabled

        # Give the user some feedback
        set fileSelect(dir) $dir
        .fileSelect.list delete 0 end
        .fileSelect.list insert 0 Listing...

        .fileSelect.list delete 0
        # If files is undefined, then match all files in current dir
        if {[string length $files] == 0} {
                # List the directory and add an entry for the parent dir.
                set files [glob -nocomplain $fileSelect(dir)/*]
                .fileSelect.list insert end ../
        }

        # Take files, and sort all dirs to front
        set dirs {}
        set others {}
        foreach f [lsort $files] {
                if [file isdirectory $f] {
                        lappend dirs [file tail $f]/
                } else {
                        lappend others [file tail $f]
                }
        }

        # Insert all dirs and files into the listbox
        foreach f [concat $dirs $others] {
                .fileSelect.list insert end $f
        }
}


# Checks files specified, and whether or not to return a value, or
# make a new listbox.  Basically, first check if command is to go to 
# parent directory.  If not, check if fileSelect(path) is a directory.
# If so, create new list.  If not, check if is a file.  If so, return
# the file, else, try some magic to go somewhere else. (also known
# as file name completion.
proc fileSelectOK {} {
        global fileSelect

        # Handle the special case of the parent directory
        if {[regexp {\.\./} $fileSelect(path)]} {
                set fileSelect(path) {}
                fileSelectList [file dirname $fileSelect(dir)]
                return
        }

        # create a full path from fileSelect(dir) and fileSelect(path)
        set path $fileSelect(dir)/$fileSelect(path)
        if [file isdirectory $path] {
                set fileSelect(path) {}
                fileSelectList $path
                return
        }
        if [file exists $path] {
                set fileSelect(path) $path
                set fileSelect(done) 1
                return
        }

        # Neither a file nor a directory
        # See if a glob will find something
        # catch returns true if something goes wrong
        if [catch {glob $path} files] {
                # Okay, maybe they typed in a new absolute pathname and we
                # should try fileSelect(path) as the ENTIRE path name
                if [catch {glob $fileSelect(path)} path] {
                        # Okay, nothing there, if we're writing, then accept as 
                        # as new filename, else try filename completion.
                        if {[string match $fileSelect(why) Write]} {
                                set fileSelect(done) 1
                                return
                        } else {
                                # Try file name completion
                                fileSelectComplete
                                return
                        }
                } else {
                # OK - there are files there, so let's reassign the dir and path
                set fileSelect(dir) [file dirname $fileSelect(path)]
                set fileSelect(path) [file tail $fileSelect(path)]
                fileSelectOK
                return
                }
        } else {
                # Current directory has stuff in it, catch returned no error
                # Ok - current directory is ok, select file or list 'em.
                if {[llength [split $files]] == 1} {
                        set fileSelect(path) $files
                        fileSelectOK
                } else {
                        set fileSelect(dir) [file dirname [lindex $files 0]]
                        fileSelectList $fileSelect(dir) $files
                }
        }
}

# Quits out of fileSelection and moves on.
proc fileSelectCancel {} {
        global fileSelect
        set fileSelect(done) 1
        set fileSelect(path) {}
}

# Find the file the user clicked on.
proc fileSelectClick { y } {
        # Take the item the user clicked on
        global fileSelect
        set l .fileSelect.list
        set fileSelect(path) [$l get [$l nearest $y]]
        focus $fileSelect(pathEnt)
}

# Big nasty routine to do file name completion
proc fileSelectComplete {} {
        global fileSelect

        # Do name completion, Nuke something.
        set fileSelect(path) [string trim $fileSelect(path) \t\ ]

        # Figure out what directory we are looking at,
        # dir is directory, tail is partial name
        if {[string match /* $fileSelect(path)]} {
                set dir [file dirname $fileSelect(path)]
                set tail [file tail $fileSelect(path)]
        } elseif [string match ~* $fileSelect(path)] {
                if [catch {file dirname $fileSelect(path)} dir] {
                        return;         # Bad user
                }
                set tail [file tail $fileSelect(path)]
        } else {
                set path $fileSelect(dir)/$fileSelect(path)
                set dir [file dirname $path]
                set tail [file tail $path]
        }

        # See what files are there
        set files [glob -nocomplain $dir/$tail*]
        if {[llength [split $files]] == 1} {
                # Matched a single file
                set fileSelect(dir) $dir
                set fileSelect(path) [file tail $files]
        } else {
                if {[llength [split $files]] > 1} {
                        # Find the longest common prefix
                        set l [expr [string length $tail]-1]
                        set miss 0
                        # remember that files has absolute paths
                        set file1 [file tail [lindex $files 0]]
                        while {$miss == 0} {
                                incr l
                                if {$l == [string length $file1]} {
                                        # file1 is a prefix of all others
                                        break
                                }
                                set new [string range $file1 0 $l]
                                foreach f $files {
                                        if ![string match $new* [file tail $f]] {
                                                set miss 1
                                                incr l -1
                                                break
                                        }
                                }
                        }
                        set fileSelect(path) [string range $file1 0 $l]
                }
                fileSelectList $dir $files
        }
}


#**********
# procedure match
#
# input:     string       is a string of characters
#            file         is a string of characters that holds a file name.
#
# function:  open the file given by input "file" and iteratively look for
#            a text line in "file" that a) does not start with a "#", and 
#            b) whose first word (text string) matches input "string".  Upon
#            finding such a line that meets this criteria, procedure match
#            returns a 1.  If EOF is reached before a line meeting the said
#            criteria is found, then procedure match returns a 0.
#            
proc match {string file} {

    set f [open $file r]

    while {1} {

        set cnt [gets $f inline]
        if {$cnt ==  -1} {
            close $f
            return 0
        }
        set y [split $inline {}]
        set y1 [lindex $y 0]
        if {$y1 != "#"} {
            if {$string ==  $inline} {
                close $f
                return 1
            }
        }
    }
}
 

#********************
#  procedure parse
#
#  input     sf       string that holds name of sim output file.
#  
#  output    none
#
#  function  described with the code below.
proc parse {sf} {
 

# the following are globals.
# observe                 is to hold all of the variables eligible for display.
# ninps, nlats, nouts     are to hold the number of inputs, latches, outputs.
# cy                      is to hold the variable values for each cycle.
# ncy                     is to hold the number of cycles 
# what                    is to hold the identity of each variable (input, latch, output).
 
        global observe ninps nlats nouts
        global cy ncy
        global what

# the following globals are the display preference variables.
# see the man page for a discussion of these variables.
        global bgtop bg1 bg2
        global fgtop fg1 fg2
        global fonttop font1 font2
        global hlinescolor vlinescolor
        global cybarbg cybarfg
 
# open the sim output file for parsing.
        set f [open $sf r]
 
# find the .inputs, .latches, .outputs, and .initial lines in the sim output file
# and make lists out of them.
        set finps 0
        set flats 0
        set fouts 0
        set finit 0
        while {$finps == 0 || $flats == 0 || $fouts == 0 || $finit == 0}  {
            set cnt [gets $f inline]
            if {$cnt == -1} {break}
            split $inline
            set first [lindex $inline 0]
            switch $first {
                ".inputs" {
                    set inps [lreplace $inline 0 0]
                    set ninps [llength $inps]
                    set finps 1
                    for {set j 0} {$j < $ninps} {incr j} {
                        lappend what (I)
                    }
                }
                ".latches" {
                    set lats [lreplace $inline 0 0]
                    set nlats [llength $lats]
                    set flats 1
                    for {set j 0} {$j < $nlats} {incr j} {
                        lappend what (L)
                    }
                }
                ".outputs" {
                    set outs [lreplace $inline 0 0]
                    set nouts [llength $outs]
                    set fouts 1
                    for {set j 0} {$j < $nouts} {incr j} {
                        lappend what (O)
                    }
                }
                ".initial" {
                        set finit 1
                }
            }
        }
 
# if any of the .inputs, .latches, .outputs, or .initial lines are not
# found, exit with an Error.
        if {$finps ==  0} {
                puts "ERROR: No .inputs line was found!"
                return -1
        }
        if {$flats ==  0} {
                puts "ERROR: No .latches line was found!"
                return -1
        }
        if {$fouts ==  0} { 
                puts "ERROR: No .outputs line was found!"
                return -1
        }
        if {$finit ==  0} {
                puts "ERROR: No .initial line was found!"
                return -1
        }
 
# list observe holds all the variables eligible to be viewed.
# here the list of variables is dumped to the strike file (strk.simv)
# so user can later access and select variables to strike.
        set observe [concat $inps $lats $outs]
        set ff [open strk.simv w]
        foreach i $observe {
            puts $ff $i
        }
        close $ff

# Set defaults for the display preferences.
#
        set bgtop Grey 
        set bg1 White
        set bg2 Black
        set fgtop Black
        set fg1 Black
        set fg2 White 
        set fonttop -adobe-courier-bold-r-normal--12-120-75-75-m-70-iso8859-1 
        set font1 -adobe-courier-bold-r-normal--12-120-75-75-m-70-iso8859-1 
        set font2 -adobe-courier-bold-r-normal--12-120-75-75-m-70-iso8859-1 
        set hlinescolor White 
        set vlinescolor Yellow 
        set cybarbg Blue 
        set cybarfg White 

# And put them in the preferences file.
#
        set ff [open prefs.simv w]

        puts $ff "bgtop $bgtop"
        puts $ff "bg1 $bg1"
        puts $ff "bg2 $bg2"
        puts $ff "fgtop $fgtop"
        puts $ff "fg1 $fg1"
        puts $ff "fg2 $fg2"
        puts $ff "fonttop $fonttop"
        puts $ff "font1 $font1"
        puts $ff "font2 $font2"
        puts $ff "hlinescolor $hlinescolor"
        puts $ff "vlinescolor $vlinescolor"
        puts $ff "cybarbg $cybarbg"
        puts $ff "cybarfg $cybarfg"

        close $ff
 
# the following lines of code look for the beginning of the portion of
# the sim output file that contains the cycle information and upon 
# finding it stores it in "array" for further processing.
        set i 0
        while {1} {
                set cnt [gets $f inline]
                if {$cnt ==  -1} {break}
                set y [split $inline {}]
                set y1 [lindex $y 0]
                if {$y1 ==  {} || $y1 ==  "#" || $y1 ==  "."} {continue}
                set array($i) $inline
                incr i 1
        }
        set ncy $i
        close $f

# if no cycle lines were found, exit with an Error.
        if {$cnt ==  -1 && $i ==  0} {
                puts "ERROR: No simulation results found!"
                return -1
        }

# the following lines of code parse the contents of "array" into
# "cy".  each list in "array" is itself a list of strings, this step turns
# the cycle information so that each element in "cy" is a simple list of 
# strings. 
        for {set j 0} {$j < $i} {incr j} {
            set z [split $array($j) \;]
            set p [lindex $z 0]
            set q [lindex $z 1]
            set r [lindex $z 2]
            set cy($j) [concat $p $q $r]
        }
 
}
 
#*************
# procedure strike
#
# inputs      sf      string that holds file name
# 
# outputs     none
#
# function    Reads the contents of the file pointed to by input "sf" and
#             based on its contents generates an array of flags that indicate
#             whether a given variable should be displayed.  The array of 
#             flags is in one-to-one correspondence with the array of variables
#             that are eligible to be displayed.
proc strike {} {
 
    global observe
    global show nshow
 
    set nshow 0
 
    set nobvs [llength $observe]
    set j 0
    for {set i 0} {$i < $nobvs} {incr i} {
        set m [match [lindex $observe $i] strk.simv]
        if {$m ==  0} {
            lappend show 0
        } else {
            lappend show 1
            incr nshow
        }
    }
}
 
#*************
# procedure readprefs
#
# inputs      pf       string that holds file name
#
# outputs     none
#
# function    Reads the contents of the file pointed to by input "pf" and
#             sets the values of the preferences accordingly.  See the "man"
#             page for description of the preferences currently supported.
#
proc readprefs {} {
 
    global bgtop bg1 bg2
    global fgtop fg1 fg2
    global fonttop font1 font2
    global hlinescolor vlinescolor
    global cybarbg cybarfg
    global run

    set bgtop 0
    set bg1 0
    set bg2 0
    set fgtop 0
    set fg1 0
    set fg2 0
    set fonttop 0
    set font1 0
    set font2 0
    set hlinescolor 0
    set vlinescolor 0
    set cybarbg 0
    set cybarfg 0
 
    set f [open prefs.simv r]
 
    while {1} {

        set cnt [gets $f inline]
        if {$cnt ==  -1} {break}
        set first [lindex $inline 0]
 
        switch $first {
            bgtop { set bgtop [lindex $inline 1] }
            bg1 { set bg1 [lindex $inline 1] }
            bg2 { set bg2 [lindex $inline 1] }
            fgtop { set fgtop [lindex $inline 1] }
            fg1 { set fg1 [lindex $inline 1] }
            fg2 { set fg2 [lindex $inline 1] }
            fonttop { set fonttop [lindex $inline 1] }
            font1 { set font1 [lindex $inline 1] }
            font2 { set font2 [lindex $inline 1] }
            hlinescolor { set hlinescolor [lindex $inline 1] }
            vlinescolor { set vlinescolor [lindex $inline 1] }
            cybarbg { set cybarbg [lindex $inline 1] }
            cybarfg { set cybarfg [lindex $inline 1] }
        }
    }

    close $f

}

#****************
# procedure findlongestvar
#
# input        none
#
# output       none
#
# function     This procedure operates on the parsed lists of variables names and
#              values for each cycle to find a) the longest variable name, and b) 
#              the longest value of any given variable.  These values are then used
#              to set the corresponding field widths in the display.
#
proc findlongestvar {} {
    
    global observe
    global show
    global cywidth varwidth
    global cy ncy

    set nobvs [llength $observe]

    set maxlen 0
    for {set i 0} {$i < $nobvs} {incr i} {
        set active [lindex $show $i]
        if {$active == 1} {
            set str [lindex $observe $i]
            set len [string length $str]
            if {$len > $maxlen} {set maxlen $len}
        }
    }
    set varwidth [expr ($maxlen+2)*0.25]

    set maxlen 0
    for {set i 0} {$i < $ncy} {incr i} {
        for {set j 0} {$j < $nobvs} {incr j} {
            set active [lindex $show $j]
            if {$active == 1} {
                set str [lindex $cy($i) $j]
                set len [string length $str]
                if {$len > $maxlen} {set maxlen $len}
            }
        }
    }
# Takes care of finding the maximum width for cycle width
    set cywidth_cycleInfo [expr (log($ncy)+2)*0.25]
    set cywidth_dataInfo [expr ($maxlen+2)*0.25]

    if {$cywidth_cycleInfo > $cywidth_dataInfo} {
        set cywidth $cywidth_cycleInfo
    } else {
        set cywidth $cywidth_dataInfo
    }

}

#***************
# procedure drawcanvas
#
# input       none
# 
# output      none
#
# function    This procedure carries out the actual displaying.  It is described alongside
#             with the code below.
#
proc drawcanvas {} {

#---------
# these globals are the display preferences, they are read
# from file dprefs by procedure readprefs:
#
# varwidth      holds the width of the left-most column that
#               lists the variables under observation
# cywidth       holds the width of the cycle columns that
#               lists the value of the variables for each
#               cycle.
#

    global varwidth
    global cywidth
 
#---------
# the following globals hold the items to be
# displayed:
#
# cy            is the array of lists, each element is a list 
#               of the value of the items for that cycle,
# ncy           is the number of elements in cy,
# show          is an array that marks those elements in cy and
#               observe that are to be displayed, (i.e. after
#               some of the elements in observe are striken based
#               on the contents of the strike file.
# nshow         is the number of "1" elements in show,
# observe       is a list of _all_ the items that _can_ be displayed.
# what          is an array that identifies a variable as either an input, latch, or output.
#
    global cy ncy
    global show nshow
    global observe
    global what
 

#-------------
# the following globals are the prefrences variables.
#
    global bgtop bg1 bg2
    global fgtop fg1 fg2
    global fonttop font1 font2
    global hlinescolor vlinescolor
    global cybarbg cybarfg

#------------
# here the top level widget that holds the results display is
# created and the two canvases that will be used to construct
# the display are defined.

# this width and height is a good start for a workstation monitor,
# of course, the window can be resized in the usual way.
#
    set wwidth 800
    set wheight 500

    global infile
    global t
    set t .top
    toplevel $t 
    wm geometry $t ${wwidth}x${wheight}
    wm title $t "XsimView 0.1"
    set c1 $t.canvas1
    set c2 $t.canvas2

# the top of the display holds generic information.
#
    text $t.text -font $fonttop -bg $bgtop -fg $fgtop
    text $t.text1 -font $fonttop -bg $bgtop -fg $fgtop
    $t.text insert 1.0 "XSimView Rev. 0.1 (April 1996)\n"
    $t.text insert 2.0 "by J.S. Duran\n"
    $t.text insert 3.0 "ECE Department\n"
    $t.text insert 4.0 "UT Austin\n"
    $t.text1 insert 1.0 "Displaying file: $infile"
    place $t.text -x 0 -y 0 -relwidth 1.0
    place $t.text1 -relx 0.5 -y 0
 
#---------------
# build the higher level canvas (holds the variable names at the left-most
# of the display and also holds the lower level canvas).
#
    set c1w [expr $wwidth]
    set c1h [expr $nshow+1]
    set c1dims [list 0 0 ${c1w} ${c1h}c]
    canvas $c1 -relief sunken -borderwidth 2 -scrollregion $c1dims -yscrollcommand "$t.vscroll set" -bg ${bg1}
    scrollbar $t.vscroll -command "$c1 yview"
    place $t.vscroll -relx 0.98 -rely 0.15 -relheight 0.85 -width 0.5c
    place $c1 -x 0 -rely 0.15 -relheight 0.85 -relwidth 1.0
 
    set f $c1.frame
    frame $f -relief sunken -borderwidth 2 
    $c1 create window ${varwidth}c 0 -anchor nw -height ${c1h}c -width ${wwidth} -window $f

#------------
# build the lower level canvas (holds the per cycle variable value information).
#
    set c2xlen [expr $ncy*$cywidth*1.25]
    set c2scrl [list 0 0 ${c2xlen}c ${c1h}c]
    set hsw [expr $wwidth-$varwidth*40]
    canvas $f.c2 -relief sunken -borderwidth 2 -scrollregion $c2scrl -xscrollcommand "$t.hscroll set" -bg ${bg2}
    place $f.c2 -x 0 -y 0 -relheight 1.0 -relwidth 1.0
    scrollbar $t.hscroll -orient horiz -command "$f.c2 xview"
    place $t.hscroll -x 0 -rely 0.125 -height 0.5c -relwidth 1.0

#------------
# place the variable names on the higher level canvas.  also draw the horizontal grid
# lines in the lower level canvas.
#
    set q [llength $show]
    set v 1
    for {set i 0} {$i < $q} {incr i} {
        set sh [lindex $show $i]
        if {$sh ==  1} {
            set item1 [lindex $observe $i]
            set item2 [lindex $what $i]
            set item $item1$item2    
            $c1 create text ${varwidth}c ${v}c -text $item -anchor ne -fill $fg1 -font $font1
            $f.c2 create line 0 [expr $v+0.4]c ${c2xlen}c [expr $v+0.4]c -fill $hlinescolor
            incr v
        }
    }

#-----------
# place the per cycle data on the lower level canvas.  also draw the vertical grid lines on the
# lower level canvas and generate the cycle number bar at the top of the lower level canvas.
#
    set over1 [expr $cywidth*0.5]
    set over2 $cywidth
    set xtx $over1
    set xln $over2
    set xrc1 0
    set xrc2 $over2
    for {set i 0} {$i < $ncy} {incr i} {
        $f.c2 create rectangle ${xrc1}c 0 ${xrc2}c 0.5c -fill $cybarbg -outline $vlinescolor
        set cylabel "CY$i"
        $f.c2 create text ${xtx}c 0.25c -width ${cywidth}c -text $cylabel -fill $cybarfg -justify center -font $font2
        $f.c2 create line ${xln}c 0 ${xln}c ${c1h}c -fill $vlinescolor
        set v 1
        for {set k 0} {$k < $q} {incr k} {
            set sh [lindex $show $k]
            if {$sh ==  1} {
                set item [lindex $cy($i) $k]
                $f.c2 create text ${xtx}c ${v}c -width ${cywidth}c -text $item -fill $fg2 -justify center -font $font2
                incr v
            }
        }
        set xtx [expr $xtx+$cywidth]
        set xln [expr $xln+$cywidth]
        set xrc1 [expr $xrc1+$cywidth]
        set xrc2 [expr $xrc2+$cywidth]
    }

    unset show

}


#############################################
# main body of XsimView
#

#-------
# parse the command line (either one argument -- sim output file name --
# or none.
#

global infile
global t

if {$argc == 0} {
    set infile "in.simv"
    puts "setting input file to in.simv\n"
} elseif {$argc == 1} {
    set infile [lindex $argv 0]
} else {
    puts "syntax is:  xsimview <filename>\n"
    exit
}

######################################################
##### FILES NECESSARY FOR SAVING
######################################################

proc doSave {} {
        set file [fileSelect Write]
        catch {exec cp in.simv $file}
}

####################################################
##### END FILES NECESSARY FOR SAVING
####################################################

#------------------
# initialization sequence.
# 
# parse the sim output file (only needs to be done once).
# open the main window for XsimView
# 
parse $infile
wm title . "XsimView 0.1"
button .go -text GO -command {
    strike
    findlongestvar
    readprefs
    drawcanvas
}
button .redraw -text ReDraw -command {
    destroy $t
    strike
    findlongestvar
    readprefs
    drawcanvas
}
button .save -text Save -command {doSave}
button .quit -text Quit -command {destroy .}

pack .go -side left -padx 2m -pady 2m
pack .redraw -side left -padx 2m -pady 2m
pack .save -side left -padx 2m -pady 2m
pack .quit -side left -padx 2m -pady 2m