source: vis_dev/vis-2.3/share/help/setCmd.txt @ 20

  set - set an environment variable
     _________________________________________________________________

   set [-h] [<name>] [<value>]

   A variable environment is maintained by the command interpreter. The "set"
   command sets a variable to a particular value, and the "unset" command
   removes the definition of a variable. If "set" is given no arguments, it
   prints the current value of all variables.

   Command options:

   -h
          Print the command usage.

   <name>
          Variable name

   <value>
          Value to be assigned to the variable.

   Interpolation  of variables is allowed when using the set command. The
   variables  are referred to with the prefix of '$'. So for example, the
   following can be done to check the value of a set variable:
   vis> set foo bar
   vis> echo $foo
   bar
   The last line "bar" will the output produced by vis.

   Variables can be extended by using the character ':' to concatenate values.
   For example :
   vis> set foo bar
   vis> set foo $foo:foobar
   vis> echo $foo
   bar:foobar
   The variable foo is extended with the value foobar .

   Whitespace  characters may be present within quotes. However, variable
   interpolation lays the restriction that the characters ':' and '/' may not
   be used within quotes. This is to allow for recursive interpolation. So for
   example, the following is allowed
   vis> set "foo bar" this
   vis> echo $"foo bar"
   this
   The last line will be the output produced by vis.
   But  in  the  following, the value of the variable foo/bar will not be
   interpreted correctly:

   vis> set "foo/bar" this
   vis> echo $"foo/bar"
   foo/bar
   If a variable is not set by the "set" command, then the variable is returned
   unchanged.

   Different commands use environment information for different purposes. The
   command interpreter makes use of the following parameters:

   autoexec
          Defines a command string to be automatically executed after every
          command processed by the command interpreter. This is useful for
          things like timing commands, or tracing the progress of optimization.

   open_path
          "open_path" (in analogy to the shell-variable PATH) is a list of
          colon-separated strings giving directories to be searched whenever a
          file is opened for read. Typically the current directory (.) is first
          in   this   list.   The   standard  system  library  (typically
          $VIS_LIBRARY_PATH) is always implicitly appended to the current path.
          This provides a convenient short-hand mechanism for reaching standard
          library files.

   vis_stderr 
          Standard error (normally stderr) can be re-directed to a file by
          setting the variable vis_stderr.

   vis_stdout
          Standard output (normally stdout) can be re-directed to a file by
          setting the variable vis_stdout.

   Building MDDs for the network makes use of following setting:

   partition_method
          This  parameter  is  used to select the method for creating the
          partition.  The  vertices  of  a  partition  correspond  to the
          combinational inputs, combinational outputs, and any intermediate
          nodes used. Each vertex has a multi-valued function (represented by
          MDDs) expressing the function of the corresponding network node in
          terms of the partition vertices in its transitive fanin. Hence, the
          MDDs of the partition represent a partial collapsing of the network.
          The possible values of partition_method are:

        inout
                Expresses  the  combinational  outputs  in  terms  of the
                combinational inputs. This is the default partitioning method.

        total
                The partition built is isomorphic to the combinational part of
                the network. The function of each node is expressed in terms of
                its immediate fanins.

        frontier
                The partition built contains the combinational part of the
                network as well as vertices corresponding to some intermediate
                nodes. These vertices are generated to control the MDD sizes of
                the combinational outputs. The number of intermediate variables
                can be controlled by the parameter "partition_threshold". The
                method "inout" and "total" are special cases of this method
                (corresponding to a partition_threshold of infinity and 0
                respectively).

   partition_threshold
          This parameter is used in conjuction with the selection of "frontier"
          as partition method. This determines the threshold at which a new MDD
          variable is created in the partition.

   Image computation makes use of following settings:

   image_method
          The "image_method" parameter is used to control the image method used
          in various symbolic analysis techniques. Currently, two image methods
          are  implemented. Use "set image_method <method>" to choose the
          appropriate method.

        monolithic
                This is the most naive approach possible. However, this method
                is not suitable for circuits with more than 20 latches.

        tfm
                This is the pure transition function method. This method is
                supposed not to be used in general fixpoint computations.
                Approximate  traversal  is an application of this method.
                Basically this method is made as a part of hybrid method. For
                more  detailed options, see the help of print_tfm_options
                command.

        hybrid
                This is a hybrid method combining transition relation and
                function  methods. Transition relation method is based on
                conjunction  of  partitioned transition relation, whereas
                transition function method is based on splitting on an input or
                output variable recursively. The hybrid method choose either
                splitting or conjunction at each recursion dynamically using
                the dependence matrix. For details, refer to the paper "To
                split or to Conjoin: The Question in Image Computation" by
                In-Ho Moon, James Kukula, Kavita Ravi, and Fabio Somenzi,
                DAC'00.  Also  for more detailed options, see the help of
                print_hybrid_options command.

        iwls95
                This technique is based on the early variable quantification
                and  related  heuristics of Ranjan, et al. "Efficient BDD
                Algorithms for FSM Synthesis and Verification", IWLS 1995.
                First,  from  the  given multivalued functions, bit level
                relations are created. These relations are then clustered based
                on   the   value   of   threshold   value  controlled  by
                image_cluster_size parameter. Next the relations are ordered
                for early variable quantification. This ordering is controlled
                by the parameters image_W1, image_W2, image_W3, and image_W4.

        mlp
                This technique is based on minimizing the variable lifetime in
                the conjunctions of the partitioned transition relation. The
                method  is called MLP (Minimal Lifetime Permutation). For
                details, refer to the paper "Border-Block Triangular Form and
                Conjunction Schedule in Image Computation" by In-Ho Moon, Gary
                Hachtel, and Fabio Somenzi, FMCAD'00. Also for more detailed
                options, see the help of print_mlp_options command.

   image_farside_method
          This parameter is used in conjunction with the selection of iwls95,
          mlp,  or  linear  as the image_method. When the value is 1, the
          compositional far side image computation approach is enabled; when
          the value is 0, this feature is disabled (default).

   image_cluster_size
          This parameter is used in conjunction with the selection of iwls95 as
          the image_method. The value of this parameter is used as threshold
          value for creating clusters. The default value of this parameter is
          5000 which has been empirically proved to be an optimal value.

   image_W1, image_W2, image_W3, image_W4
          These parameters are used in conjunction with the selection of iwls95
          as the image_method. They control the weights associated with various
          factors in ordering the clusters. The default values are 6, 1, 1, and
          2 respectively. For a detailed description of these parameters,
          please refer to the paper in IWLS'95 proceedings.

   image_verbosity
          Sets the verbosity mode (0 minimum to 4 maximum), for the image
          method iwls95.

   image_minimize_method <method>
          Sets a minimization method to minimize the transition relation or an
          image/preimage computaion with a set of dont-care states.

          Methods: 0 : restrict (default).

          1 : constrain

          2 : compact (currently supported by only CUDD)

          3 : squeeze (currently supported by only CUDD)

   scc_method <method>
          Sets the symbolic method to enumerate strongly connected components
          (SCCs). Symbolic SCC enumeration is the core computation in LTL and
          fair-CTL model checking.

          Methods: lockstep : the O(nlogn) time LockStep algorithm (default).

          Methods: linearstep : the linear time symbolic algorithm (default).
     _________________________________________________________________

   Last updated on 20100410 00h02