source: vis_dev/vis-2.3/share/help/write_blifCmd.txt @ 82

  write_blif - determinize, encode and write an hnode to a blif file
     _________________________________________________________________

   write_blif   [-c]   [-l]   [-e  <encoding_file_name>]  [-R]  [-h]  [-v
   <verbosity_value>] [<file>]

   Encodes, determinizes, and writes all tables in the current hnode to a BLIF
   file. With the '-l' or '-c' options, or when 'write_blif' is used with no
   options, only the current hnode is written out as a blif file. The '-R'
   option writes the entire hierarchy rooted at the current hnode to the blif
   file, assuming all tables are deterministic and all variables are boolean.

   Encoding the Multi-Valued Variables:

   First, all multi-valued variables in the hnode are binary encoded. Each
   multi-valued variable requires 'm' binary variables in its encoding, where m
   =  log2(n).  Here  'n'  is  the  number of values in the domain of the
   multi-valued variable. If variable X has n binary variables in its encoding,
   these  are  called X0, X1, ... X. X0 is the least significant encoding
   variable. The value i of multi-valued variable X is encoded such that X0 +
   2^1 * X1 + ... + 2^(n-1) * X = i. After encoding, each table in the hnode is
   written out to the blif file.

   Determinizing Non-Deterministic Tables:

   Non-deterministic tables are determinized by adding more binary variables to
   a particular variable's encoding. The variable that is chosen is the one
   that  has  the  smallest  number  of binary variables in its encoding.
   Determinization is explained by means of an example:

   Consider the BLIF-MV table, where each of a, b, and c can have 4 values.
   Each multi-valued variable has two binary variables in its encoding. These
   are called a0, a1, b0, b1, c0 and c1.

   .model foo

   .inputs a b

   .outputs c

   .mv a, b, c 4

   .table a b ->c

   2 1 (1,2)

   (1,2) 1 3

   .end

   The first row of this table represents non-determinism, since for a given
   assignment of input values (i.e. a=2, b=1), the output can take on two
   values (1 or 2). To determinize this row, it is split into two rows, each
   with a unique singleton output value. A new binary variable is added to the
   encoding of a (or b, since in this case each of them has the same number of
   binary variables in its encoding). The new variable a2 is given separate
   values in each of the new rows. The resulting blif table looks like:

   .model foo

   .inputs a0 a1 a2 b0 b1

   .outputs c0 c1

   .names a0 a1 a2 b0 b1 ->c0 c1

   0 1 0 1 0 1 0 (these two rows represent

   0 1 1 1 0 0 1 row 1 of the MV table)

   1 0 - 1 0 1 1 (these two rows represent

   0 1 - 1 0 1 1 row 2 of the MV table)

   .end

   Note that this table is still not deterministic, since rows 1 and 4 have
   input minterm(s) in common, but the corresponding outputs are different. To
   resolve this, a new binary variable is added to the encoding for b (since b
   currently  has  the smallest encoding). For the conflicting rows, this
   variable b2 is assigned different values, and for all other rows, it is
   assigned a '-' value. After this change, rows 1 and 4 no longer have common
   input minterm(s). The intermediate table now looks like:

   .model foo

   .inputs a0 a1 a2 b0 b1 b2

   .outputs c0 c1

   .names a0 a1 a2 b0 b1 b2->c0 c1

   0 1 0 1 0 1 1 0

   0 1 1 1 0 - 0 1

   1 0 - 1 0 - 1 1

   0 1 - 1 0 0 1 1

   .end

   This process is continued until the table is determinized. In this example,
   the final blif file looks like:

   .model foo

   .inputs a0 a1 a2 a3 b0 b1 b2

   .outputs c0 c1

   .table a0 a1 a2 a3 b0 b1 b2 ->c0 c1

   0 1 0 - 1 0 1 1 0

   0 1 1 1 1 0 - 0 1

   1 0 - - 1 0 - 1 1

   0 1 - 0 1 0 0 1 1

   .end

   Blif allows only single output tables, so in reality the above table is
   split into two single output tables before being written out to the blif
   file. The new binary variables that are thus introduced are treated as
   primary inputs in the blif file.

   We make no claim on the optimality of this process, just that it is simple.
   It may turn out that the number of new variables is much larger than the
   optimum one.

   Interfacing Between Binary and Multi-Valued Variables:

   In order for the SIS-optimized version of this file to be read back into
   VIS, we need to re-create the corresponding multi-valued variables. For this
   purpose, interface information (model name, input and output declarations
   for the hnode) is written out to a special encoding file (e.g. foo.enc).
   Additionally,  binary->multi-valued encoding tables are written to the
   encoding file for each PO. In the above example, the binary->multi-valued
   table for variable c looks like

   .table c0 c1 -> c

   0 0 0

   1 0 1

   0 1 2

   1 1 3

   and  this can be seen as a decoder of the binary variables. Similarly,
   multi-valued->binary encoding tables are written to the encoding file for
   each PI. The multi-valued->binary table for variable b in the above example
   is:

   .table b -> b0 b1

   0 0 0

   1 1 0

   2 0 1

   3 1 1

   and this can be seen as an encoder of the multi-valued variables. Similar
   tables are written to the encoding file for sub-circuit inputs and outputs.
   Likewise, such tables are written out for latch inputs and outputs. This is
   needed so that the original multi-valued latches can be reinstated while the
   blif file is being read back into VIS. These multi-valued latch declarations
   are written to the encoding file during the write_blif process.

   The combination of this encoding file and the blif file results in a legal
   BLIF-MV hnode description.

   If  no file is specified, the blif file is written out to the standard
   output. If the encoding file is not specified, encoding information is
   written out to .enc.

   Options:

   The '-R' option writes the entire hierarchy rooted at the current hnode to
   the blif file, first checking that all tables are deterministic and all
   variables are boolean. Other options ('-c', '-l', or write_blif with no
   options) only write out the current hnode. Also, when the '-R' option is
   specified, no encoding file is written since none is needed.

   Command options:

   -c
          Writes only combinational part to blif file.

   -l
          Writes out latches, making latch IOs primary outputs in the blif
          file.

   -e <encoding_file_name>
          If set, the program writes the encoding information into this file.
          The default is the model name for the current node extended by .enc.

   -R
          Recursively writes out the entire hierarchy rooted at the current
          hnode to the blif file. In this sub-hierarchy, all tables must be
          deterministic and all variables must be boolean. Either of the -c, -l
          or -e options cannot be used together with this option.

   -h
          Prints the command usage.

   -v <verbosity_value>
          Specifies verbosity level, an integer less than 3.

   <file>
          name of blif file to be written, default is standard output.

          Note  that if neither the -c or the -l options are chosen, then
          latches are written out, without making latch IOs primary outputs in
          the blif file. Currently the files written out using this option
          cannot be read back into VIS.
     _________________________________________________________________

   Last updated on 20100410 00h02