Sun Jul 28 23:15:43 MEST 2024 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/base32.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-25876"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 4649 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.11 (INSTALL_XEN3_DOMU) #0: Thu Jul 25 16:45:36 UTC 2024 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 231 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.0_20231116nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.2201463] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.2201463] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.2201463] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.2201463] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.2201463] xbd0: backend features 0x1 [ 1.2201463] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.2201463] balloon0: current reservation: 262144 KiB [ 1.2300968] xbd1: 498 MB, 512 bytes/sect x 1020452 sectors [ 1.2300968] xbd1: backend features 0x1 [ 1.2300968] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.2300968] balloon0: current reservation: 65536 pages => target: 65536 pages [ 1.2300968] WARNING: 2 errors while detecting hardware; check system log. [ 1.2300968] boot device: xbd0 [ 1.2300968] root on md0a dumps on md0b [ 1.2300968] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.2300968] root file system type: ffs [ 1.2300968] kern.module.path=/stand/amd64/10.99.11/modules Created tmpfs /dev (1835008 byte, 3552 inodes) [ 5.9600978] entropy: best effort erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                          [?7l [?7h NetBSD/amd64 10.99.11 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Installation auf Deutsch (0x(B(0x(B c: Mensajes de instalacion en castellano (0x(B(0x(B d: Messages d'installation en français (0x(B(0x(B e: Komunikaty instalacyjne w jezyku polskim (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.11 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (498M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 12.7801001] dk0 at xbd0: "b3341caa-d46c-4564-98f0-fd3b9a0a2bac", 524288 blocks at 3669952, type: swap [ 12.7801001] dk1 at xbd0: "91e6cf58-6650-4aac-a704-365f221ab06b", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the selected serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ---------------------------------- --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Base 32-bit compatibility libraries No f: Configuration files (/etc) Yes g: Compiler tools No h: Games No i: Graphics driver firmware Yes j: Manual pages No k: Manual pages (HTML) No l: Miscellaneous No m: Recovery tools No n: Test programs No o: Text processing tools No p: X11 sets None q: Source and debug sets None >x: Install selected sets >e: Base 32-bit compatibility libraries No x: Install selected setsYes  e: Base 32-bit compatibility libraries Yes >g: Compiler tools No Yes  g: Compiler tools Yes >l: Miscellaneous No Yes  l: Miscellaneous Yes >m: Recovery tools No Yes  m: Recovery tools Yes >n: Test programs No Yes  n: Test programs Yes >p: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bles (/etc) Yes  Yes  No firmware Yes  No ML) No  Yes   Yes   Yes tools No  p: X11 sets None >q: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bles (/etc) Yes  Yes  No firmware Yes  No ML) No  Yes  Yes  Yes  tools No   None  sets None  q: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 10, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA44% |***************12895 KiB 12.49 M00:01 ETA100********************| 288904.780 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA20% |*******6724 KiB 6.50 M00:03 ETA64***************2100910.151 ETA100*************| 326901.60 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA5% |*13781 KiB 13.43 M00:15 ETA10% |***246781.986 ETA6% |*****385102.44 ETA24***554553.502 ETA8*662442.931*7211.733 ETA2*38300.284 ETA6*8297611353 9.055 ETA4578.27 ETA8*76177.77129 ETA6.5821 ETA112 ETA42*9825390 ETA9*** 110 M8816 ETA52*7935 ETA39628**31933 ETA26161*82 ETA5*4641 ETA7*5220 ETA70*8591614409 ETA3*433105.8810 ETA649311 ETA6*72809 ETA8****93855 ETA91*2056.043 ETA65.88734*1102 ETA5541281520100***| 224240 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base32.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA40% |**************15990 KiB 15.60 M00:01 ETA52****210430.2165****6102 8.4687********34951500 ETA96*** | 3850976.265.374.70173.7541- stalled -100**| 3973033 00:00 ETAFinished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 15.91 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA112366 KiB 12.04 M00:50 ETA3% |*208000.099 ETA431176108 ETA5924 7.781:15 ETA26086.3532 ETA3545.4448 ETA41674.752:03 ETA7282319 ETA76570823 ETA7% |**49612831:58 ETA5000842:09 ETA1340720 ETA3.7632 ETA4944 ETA815663550 ETA10% |***640249023 ETA2966931 ETA52449 ETA9892584 ETA175036629 ETA3% |****82960850 ETA3616705 ETA41445731 ETA5* 97 MiB 4.008 ETA93.9612 ETA816 ETA6722 ETA547 ETA4232 ETA317 ETA2043 ETA6104738 ETA9*227114 ETA21*38905 ETA2414.041:58 ETA23.952:01 ETA4*534.131:53 ETA045 ETA43.958 ETA872:00 ETA5793 ETA5625 ETA638 ETA5511 ETA474 ETA6*655906 ETA9*8941:50 ETA31944.045 ETA722*20482 ETA381 ETA4141238 ETA50640 ETA6*272133 ETA8154 ETA3015 ETA7037 ETA3.978 ETA040 ETA841 ETA9*464.0333 ETA41*612125 ETA3*863 ETA7022195853118 ETA6*926 ETA90277 ETA88334 ETA9*309420 ETA361 ETA02 ETA243 ETA184 ETA25 ETA076 ETA27 ETA3.97- stalled -253*304.1 01:10 ETA5*42206 ETA6964 ETA758320 ETA9*6990:57 ETA60*74406 ETA7395 ETA1824 ETA27403 ETA3*9321 ETA480 ETA381 ETA3282 ETA4193 ETA51- stalled -0623.9840874016 00:57 ETA7*17981 ETA71*424.1743 ETA3*603037 ETA5*754 ETA653 ETA262979880**94127 ETA501023732958 ETA2185- stalled -20855*32 00:21 ETA8*533915 ETA90*62433 ETA3043717191 ETA3*824408 ETA4757 ETA8239963296305*936 ETA760993 ETA100**| 622350 ETAFinished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA64% |**********************29996 KiB 29.11 M00:00 ETA82******3864818.73*962.649249 9.544767.686.401 ETA5.494.80273.8449- stalled -98***** | 4571371 00:00 ETA100*| 465806 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA99% |********************************** | 14553 KiB 14.09 M00:00 ETA100*| 146903.92 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9740 KiB 10.64 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA12% |****10104 KiB 9.80 M00:06 ETA29******2311211.194 ETA32*5494 8.256 ETA368436.527 ETA5.29 ETA4.3511 ETA4****349498708 ETA6*7276549 ETA780841286123.7610 ETA52**41496675*43025909 ETA9*714038 ETA464309 ETA63**50302278 ETA9**5080357 ETA706084216**6121235 ETA7390154862.99500856 ETA7261507 ETA43- stalled -93****** | 747277 00:01 ETA100***| 79620810 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                   Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-10.99.11 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters.      They should contain at last 256 bits of randomness, as in 256 coin tosses,************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 301.5001907] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.11 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [[ 310.7301845] dk1 at xbd0 (91e6cf58-6650-4aac-a704-365f221ab06b) deleted m[ 310.9101821] dk1: detached NetBSD/amd64 10.99.11 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.11 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-25876 Sun Jul 28 23:22:20 MEST 2024 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202407261110Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-7420"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202407261110Z-amd64-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 29967 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.11 (XEN3_DOMU) #0: Thu Jul 25 16:45:36 UTC 2024 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 483 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.0_20231116nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 2.0000534] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0000534] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 62.0000868] waiting for devices: xenbus0 xbd0 [ 122.0000885] waiting for devices: xenbus0 xbd0 [ 182.0000841] waiting for devices: xenbus0 xbd0 [ 242.0000911] waiting for devices: xenbus0 xbd0 [ 302.0000918] waiting for devices: xenbus0 xbd0 [ 362.0000918] waiting for devices: xenbus0 xbd0 [ 422.0000867] waiting for devices: xenbus0 xbd0 [ 482.0001128] waiting for devices: xenbus0 xbd0 [ 542.0000540] waiting for devices: xenbus0 xbd0 [ 602.0001059] waiting for devices: xenbus0 xbd0 [ 662.0000873] waiting for devices: xenbus0 xbd0 [ 722.0000948] waiting for devices: xenbus0 xbd0 [ 782.0000598] waiting for devices: xenbus0 xbd0 [ 842.0000590] waiting for devices: xenbus0 xbd0 [ 902.0000579] waiting for devices: xenbus0 xbd0 [ 962.0000904] waiting for devices: xenbus0 xbd0 [ 1022.0000611] waiting for devices: xenbus0 xbd0 [ 1082.0000613] waiting for devices: xenbus0 xbd0 [ 1142.0000609] waiting for devices: xenbus0 xbd0 [ 1202.0000610] waiting for devices: xenbus0 xbd0 [ 1262.0000931] waiting for devices: xenbus0 xbd0 [ 1322.0000922] waiting for devices: xenbus0 xbd0 [ 1382.0000613] waiting for devices: xenbus0 xbd0 [ 1442.0001147] waiting for devices: xenbus0 xbd0 [ 1502.0001148] waiting for devices: xenbus0 xbd0 [ 1562.0000973] waiting for devices: xenbus0 xbd0 [ 1622.0000709] waiting for devices: xenbus0 xbd0 [ 1682.0000609] waiting for devices: xenbus0 xbd0 [ 1742.0000897] waiting for devices: xenbus0 xbd0 [ 1802.0001080] waiting for devices: xenbus0 xbd0 [ 1862.0000615] waiting for devices: xenbus0 xbd0 [ 1922.0001435] waiting for devices: xenbus0 xbd0 [ 1982.0001026] waiting for devices: xenbus0 xbd0 [ 2042.0000600] waiting for devices: xenbus0 xbd0 [ 2102.0001077] waiting for devices: xenbus0 xbd0 [ 2162.0000908] waiting for devices: xenbus0 xbd0 [ 2222.0000907] waiting for devices: xenbus0 xbd0 [ 2282.0001080] waiting for devices: xenbus0 xbd0 [ 2342.0000660] waiting for devices: xenbus0 xbd0 [ 2402.0000855] waiting for devices: xenbus0 xbd0 [ 2462.0001047] waiting for devices: xenbus0 xbd0 [ 2522.0000928] waiting for devices: xenbus0 xbd0 [ 2582.0000904] waiting for devices: xenbus0 xbd0 [ 2642.0000906] waiting for devices: xenbus0 xbd0 [ 2702.0001047] waiting for devices: xenbus0 xbd0 [ 2762.0000630] waiting for devices: xenbus0 xbd0 [ 2822.0000675] waiting for devices: xenbus0 xbd0 [ 2882.0001048] waiting for devices: xenbus0 xbd0 [ 2942.0001107] waiting for devices: xenbus0 xbd0 [ 3002.0001180] waiting for devices: xenbus0 xbd0 [ 3062.0000895] waiting for devices: xenbus0 xbd0 [ 3122.0000608] waiting for devices: xenbus0 xbd0 [ 3182.0001206] waiting for devices: xenbus0 xbd0 [ 3242.0000642] waiting for devices: xenbus0 xbd0 [ 3302.0000597] waiting for devices: xenbus0 xbd0 [ 3362.0000687] waiting for devices: xenbus0 xbd0 [ 3422.0004302] waiting for devices: xenbus0 xbd0 [ 3482.0001086] waiting for devices: xenbus0 xbd0 [ 3542.0001181] waiting for devices: xenbus0 xbd0 xl \ destroy \ anita-7420 Mon Jul 29 00:22:52 MEST 2024