Wed Mar 26 23:12:21 MET 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvshim \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/floppy/boot7.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/gpufw.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/rescue.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/kernel/netbsd-XEN3PAE_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-12528"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/download/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz"' \ 'type="pvh"' \ pvshim=1 \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 2515 Parsing config from /dev/null (XEN) Initialised PV console at 0xffff82cfffffb000 with pfn 0xfefff and evtchn 0x2 Xen 4.18.3 (XEN) Xen version 4.18.3 (pbulk@) (gcc (nb3 20231008) 10.5.0) debug=n Thu Oct 3 07:39:43 UTC 2024 (XEN) Latest ChangeSet: (XEN) build-id: b65acc6f72aea0ed8b42d83910391b1eab23767f (XEN) PVH start info: (pa 0000ffc0) (XEN) version: 1 (XEN) flags: 0 (XEN) nr_modules: 1 (XEN) modlist_pa: 000000000000ff80 (XEN) cmdline_pa: 000000000000ffa0 (XEN) cmdline: 'pv-shim console=xen,pv' (XEN) rsdp_pa: 00000000fc008000 (XEN) mod[0].pa: 0000000000a00000 (XEN) mod[0].size: 0000000012353732 (XEN) mod[0].cmdline_pa: 0000000000000000 (XEN) Bootloader: PVH Directboot (XEN) Command line: pv-shim console=xen,pv (XEN) Xen image load base address: 0 (XEN) Running on Xen (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 0 EDD information structures (XEN) CPU Vendor: Intel, Family 6 (0x6), Model 44 (0x2c), Stepping 2 (raw 000206c2) (XEN) PVH-e820 RAM map: (XEN) [0000000000000000, 000000000fffffff] (usable) (XEN) [00000000fc000000, 00000000fc00803f] (ACPI data) (XEN) [00000000feff8000, 00000000feffbfff] (reserved) (XEN) [00000000feffc000, 00000000feffcfff] (usable) (XEN) [00000000feffd000, 00000000feffffff] (reserved) (XEN) BSP microcode revision: 0x00000014 (XEN) New Xen image base address: 0xf600000 (XEN) System RAM: 256MB (262148kB) (XEN) ACPI: RSDP FC008000, 0024 (r2 Xen) (XEN) ACPI: XSDT FC007F60, 0034 (r1 Xen HVM 0 HVML 0) (XEN) ACPI: FACP FC007D60, 010C (r5 Xen HVM 0 HVML 0) (XEN) ACPI: DSDT FC001040, 6C9B (r5 Xen HVM 0 INTL 20221020) (XEN) ACPI: FACS FC001000, 0040 (XEN) ACPI: APIC FC007E70, 003C (r2 Xen HVM 0 HVML 0) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000000feffd000 (XEN) Domain heap initialised (XEN) DMI not present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer is too short (XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0] (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:b004,1:0], pm1x_evt[1:b000,1:0] (XEN) ACPI: wakeup_vec[fc00100c], vec_size[20] (XEN) ACPI: No IOAPIC entries present (XEN) SMP: Allowing 2 CPUs (0 hotplug CPUs) (XEN) Found and enabled local APIC! (XEN) IRQ limits: 16 GSI, 400 MSI/MSI-X (XEN) Switched to APIC driver x2apic_mixed (XEN) CPU0: Intel machine check reporting enabled (XEN) Speculative mitigation facilities: (XEN) Hardware hints: GDS_NO RFDS_NO (XEN) Hardware features: (XEN) Compiled-in support: INDIRECT_THUNK HARDEN_ARRAY HARDEN_BRANCH HARDEN_GUEST_ACCESS HARDEN_LOCK (XEN) Xen settings: BTI-Thunk: RETPOLINE, BHB-Seq: SHORT, SPEC_CTRL: No, Other: BRANCH_HARDEN (XEN) L1TF: believed vulnerable, maxphysaddr L1D 44, CPUID 40, Safe address 10000000000 (XEN) Support for PV VMs: RSB EAGER_FPU BHB-entry (XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (without PCID) (XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: null Scheduler (null) (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) Platform timer is 1000.000MHz XEN PV CLOCK (XEN) Detected 2666.760 MHz processor. (XEN) alt table ffff82d040689358 -> ffff82d04068e8c4 (XEN) I/O virtualisation disabled (XEN) Enabling APIC mode. Using 0 I/O APICs (XEN) Platform timer appears to have unexpectedly wrapped 10 or more times. (XEN) Allocated console ring of 16 KiB. (XEN) alt table ffff82d040689358 -> ffff82d04068e8c4 (XEN) Brought up 1 CPUs (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) mcheck_poll: Machine check polling timer started. (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) NX (Execute Disable) protection active (XEN) *** Building a PV Dom279 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0d61000 (XEN) Dom0 symbol map 0xc0d61000 -> 0xc0df91b4 (XEN) shim used pages 0x153a reserving 0x100 free pages (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000000d000000->000000000e000000 (55751 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: 00000000c0100000->00000000c0df91b4 (XEN) Phys-Mach map: 00000000c0dfa000->00000000c0e3471c (XEN) Start info: 00000000c0e35000->00000000c0e35490 (XEN) Xenstore ring: 00000000c0e36000->00000000c0e37000 (XEN) Console ring: 00000000c0e37000->00000000c0e38000 (XEN) Page tables: 00000000c0e38000->00000000c0e45000 (XEN) Boot stack: 00000000c0e45000->00000000c0e46000 (XEN) TOTAL: 00000000c0000000->00000000c1000000 (XEN) ENTRY ADDRESS: 00000000c0100000 (XEN) Dom279 has maximum 2 VCPUs (XEN) Initial low memory virq threshold set at 0x40 pages. (XEN) Scrubbing Free RAM in background (XEN) Std. Loglevel: Errors, warnings and info (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input to DOM279 (type 'CTRL-a' three times to switch input) (XEN) Freed 2048kB init memory [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.12 (INSTALL_XEN3PAE_DOMU) #0: Tue Mar 25 03:15:32 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3PAE_DOMU [ 1.0000000] total memory = 233 MB [ 1.0000000] avail memory = 214 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.3 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 2.0000780] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0000780] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 2.0000780] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 2.0100649] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 2.0100649] xbd0: backend features 0x1 [ 2.0100649] balloon0 at xenbus0 id 0: Xen Balloon driver [ 2.0100649] balloon0: current reservation: 239388 KiB [ 2.0100649] xbd1: 538 MB, 512 bytes/sect x 1103548 sectors [ 2.0100649] xbd1: backend features 0x1 [ 2.0100649] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0100649] balloon0: new target 262144 is above max 239388 [ 2.0100649] WARNING: 2 errors while detecting hardware; check system log. [ 2.0100649] boot device: xbd0 [ 2.0100649] root on md0a dumps on md0b [ 2.0100649] root file system type: ffs [ 2.0100649] kern.module.path=/stand/i386/10.99.12/modules Created tmpfs /dev (1867776 byte, 3616 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                          [?7l [?7h NetBSD/i386 10.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Installation auf Deutsch (0x(B(0x(B c: Mensajes de instalacion en castellano (0x(B(0x(B d: Messages d'installation en français (0x(B(0x(B e: Komunikaty instalacyjne w jezyku polskim (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.12 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B[ 6.2400954] entropy: best effort  a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (539M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 89M without X and at least 339M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1654784 (3715005) + / b: 479232 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 2060221 sec.  a: 1654784 (3715005) + / >b: 479232  b: 479232 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 2060221 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3715007 3714944 FFSv2ea IN /  b: 3715008 4194239 479232 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 8.7801158] dk0 at xbd0: "34e02096-6382-4cae-9da7-e1789432a535", 3714944 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk0 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk0: 1813.9MB (3714944 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 181.41MB, 11610 blks, 22528 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the selected serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk0 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ---------------------------------- --------   a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes  tools No   None  sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes tools No  None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device  b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: File extension .tgz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tgz files.  election & retry    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set /source/sets d: File extension.tgz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 25600 KiB 66.69 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23550 KiB 65.39 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA28% |*********64832 KiB 62.79 M00:02 ETA41*****9324845.112414430.564 ETA3*651223.515 ETA4 97 MiB 19.546 ETA86.377 ETA6*1024.642.829 ETA1.4010 ETA61*****343.4306 ETA52.273*81.540.687 ETA9 9.94543558.988 ETA7*76982373**60456 ETA82***89.014 ETA18.64*540066*907.913 ETA761349*62793*205341 ETA9** | 21850 ETA100*41 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 7.90 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA18256 KiB 8.05 M00:57 ETA9604.371:45 ETA21213.9556 ETA92812:25 ETA3% |*619264 ETA2512.6452 ETA4213769831 ETA9% |***448005.461:18 ETA52484.9027 ETA1096008450048435 ETA6241142 ETA138043 ETA4463.7950 ETA5808634 ETA7% |*****826245.0417 ETA39684.8220 ETA5120614 ETA8*7104476 ETA352530 ETA05 ETA97283.986 ETA9068849 ETA22* 105 MiB 4.4122 ETA4*135518 ETA43921 ETA5283 ETA704 ETA520166*572 ETA055 ETA78032**536408 ETA36594710 ETA60509 ETA43411 ETA430 ETA222 ETA5*514 ETA40**906400 ETA51 ETA143 ETA1422 ETA5333 ETA254 ETA705 ETA126 ETA290720017 ETA13.958 ETA8**274.370:55 ETA9*31622946196 ETA5076097 ETA8493.988 ETA1444.006 ETA6**683246 ETA267 ETA7908 ETA71187 ETA228 ETA069 ETA8*548 ETA3.999 ETA6463**994.220 ETA430201457539 ETA800640 ETA6*11439 ETA23.99540 ETA9*274.0935 ETA72*41201 ETA163550 ETA160895416*5827 ETA9*77232 ETA80*198081 ETA1414309557**4112814 ETA4433 ETA851992 ETA59*2241 ETA3092*37208 ETA6*5353 ETA17612 ETA8*228571 ETA9700 ETA4100*| 4713 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/gpufw.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9290 KiB 25.99 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14810 KiB 22.88 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/rescue.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA79% |***************************7424 KiB 7.18 M00:00 ETA85**9363.85100******| 92904.13 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA29% |**********24384 KiB 23.74 M00:02 ETA35**8928 9.375 ETA93767.147 ETA6304005.928 ETA71232079 ETA614.3511 ETA43***57120 ETA8*96162909 ETA77**********638726.222 ETA8*45765.73 ETA50242882*7840092 ETA4*93764.838*7276871 ETA9*392050915456334* | 7820820 ETA30011 ETA5*623.8100**| 82380930 Finished   (0 (B (0 (B                     All selected distribution sets unpacked successfully.   Making device nodes ...    (0 (B (0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   Finished   (0 (B (0 (B                     The extraction of the selected sets for NetBSD-10.99.12 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B       The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters.    *******************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 224.1307548] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.    a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.12 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 231.4807821] dk0 at xbd0 (34e02096-6382-4cae-9da7-e1789432a535) deleted [ 231.4807821] dk0: detached NetBSD/i386 10.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.12 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-12528 Wed Mar 26 23:17:45 MET 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvshim \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202503250530Z/i386/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-9792"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/download/i386/binary/kernel/netbsd-XEN3PAE_DOMU.gz"' \ 'type="pvh"' \ pvshim=1 \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202503250530Z-i386-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 27222 Parsing config from /dev/null (XEN) Initialised PV console at 0xffff82cfffffb000 with pfn 0xfefff and evtchn 0x2 Xen 4.18.3 (XEN) Xen version 4.18.3 (pbulk@) (gcc (nb3 20231008) 10.5.0) debug=n Thu Oct 3 07:39:43 UTC 2024 (XEN) Latest ChangeSet: (XEN) build-id: b65acc6f72aea0ed8b42d83910391b1eab23767f (XEN) PVH start info: (pa 0000ffc0) (XEN) version: 1 (XEN) flags: 0 (XEN) nr_modules: 1 (XEN) modlist_pa: 000000000000ff80 (XEN) cmdline_pa: 000000000000ffa0 (XEN) cmdline: 'pv-shim console=xen,pv' (XEN) rsdp_pa: 00000000fc008000 (XEN) mod[0].pa: 0000000000a00000 (XEN) mod[0].size: 0000000007233680 (XEN) mod[0].cmdline_pa: 0000000000000000 (XEN) Bootloader: PVH Directboot (XEN) Command line: pv-shim console=xen,pv (XEN) Xen image load base address: 0 (XEN) Running on Xen (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 0 EDD information structures (XEN) CPU Vendor: Intel, Family 6 (0x6), Model 44 (0x2c), Stepping 2 (raw 000206c2) (XEN) PVH-e820 RAM map: (XEN) [0000000000000000, 000000001fffffff] (usable) (XEN) [00000000fc000000, 00000000fc00803f] (ACPI data) (XEN) [00000000feff8000, 00000000feffbfff] (reserved) (XEN) [00000000feffc000, 00000000feffcfff] (usable) (XEN) [00000000feffd000, 00000000feffffff] (reserved) (XEN) BSP microcode revision: 0x00000014 (XEN) New Xen image base address: 0x1f600000 (XEN) System RAM: 512MB (524292kB) (XEN) ACPI: RSDP FC008000, 0024 (r2 Xen) (XEN) ACPI: XSDT FC007F60, 0034 (r1 Xen HVM 0 HVML 0) (XEN) ACPI: FACP FC007D60, 010C (r5 Xen HVM 0 HVML 0) (XEN) ACPI: DSDT FC001040, 6C9B (r5 Xen HVM 0 INTL 20221020) (XEN) ACPI: FACS FC001000, 0040 (XEN) ACPI: APIC FC007E70, 003C (r2 Xen HVM 0 HVML 0) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000000feffd000 (XEN) Domain heap initialised (XEN) DMI not present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer is too short (XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0] (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:b004,1:0], pm1x_evt[1:b000,1:0] (XEN) ACPI: wakeup_vec[fc00100c], vec_size[20] (XEN) ACPI: No IOAPIC entries present (XEN) SMP: Allowing 2 CPUs (0 hotplug CPUs) (XEN) Found and enabled local APIC! (XEN) IRQ limits: 16 GSI, 400 MSI/MSI-X (XEN) Switched to APIC driver x2apic_mixed (XEN) CPU0: Intel machine check reporting enabled (XEN) Speculative mitigation facilities: (XEN) Hardware hints: GDS_NO RFDS_NO (XEN) Hardware features: (XEN) Compiled-in support: INDIRECT_THUNK HARDEN_ARRAY HARDEN_BRANCH HARDEN_GUEST_ACCESS HARDEN_LOCK (XEN) Xen settings: BTI-Thunk: RETPOLINE, BHB-Seq: SHORT, SPEC_CTRL: No, Other: BRANCH_HARDEN (XEN) L1TF: believed vulnerable, maxphysaddr L1D 44, CPUID 40, Safe address 10000000000 (XEN) Support for PV VMs: RSB EAGER_FPU BHB-entry (XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (without PCID) (XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: null Scheduler (null) (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) Platform timer is 1000.000MHz XEN PV CLOCK (XEN) Detected 2666.760 MHz processor. (XEN) alt table ffff82d040689358 -> ffff82d04068e8c4 (XEN) I/O virtualisation disabled (XEN) Enabling APIC mode. Using 0 I/O APICs (XEN) Platform timer appears to have unexpectedly wrapped 10 or more times. (XEN) Allocated console ring of 16 KiB. (XEN) alt table ffff82d040689358 -> ffff82d04068e8c4 (XEN) Brought up 1 CPUs (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) mcheck_poll: Machine check polling timer started. (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) NX (Execute Disable) protection active (XEN) *** Building a PV Dom280 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc087f000 (XEN) Dom0 symbol map 0xc087f000 -> 0xc0917100 (XEN) shim used pages 0x173a reserving 0x100 free pages (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000001d000000->000000001e000000 (120775 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: 00000000c0100000->00000000c0917100 (XEN) Phys-Mach map: 00000000c0918000->00000000c0991f1c (XEN) Start info: 00000000c0992000->00000000c0992490 (XEN) Xenstore ring: 00000000c0993000->00000000c0994000 (XEN) Console ring: 00000000c0994000->00000000c0995000 (XEN) Page tables: 00000000c0995000->00000000c09a0000 (XEN) Boot stack: 00000000c09a0000->00000000c09a1000 (XEN) TOTAL: 00000000c0000000->00000000c0c00000 (XEN) ENTRY ADDRESS: 00000000c0100000 (XEN) Dom280 has maximum 2 VCPUs (XEN) Initial low memory virq threshold set at 0x40 pages. (XEN) Scrubbing Free RAM in background (XEN) Std. Loglevel: Errors, warnings and info (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input to DOM280 (type 'CTRL-a' three times to switch input) (XEN) Freed 2048kB init memory [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.12 (XEN3PAE_DOMU) #0: Tue Mar 25 03:15:32 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3PAE_DOMU [ 1.0000000] total memory = 487 MB [ 1.0000000] avail memory = 468 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.3 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 2.0000705] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0000705] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 2.0000705] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 2.0000705] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 2.0000705] xbd0: backend features 0x1 [ 2.0000705] dk0 at xbd0: "34e02096-6382-4cae-9da7-e1789432a535", 3714944 blocks at 64, type: ffs [ 2.0103811] dk1 at xbd0: "d67511f8-679f-4fba-9db3-d9095c183a77", 479232 blocks at 3715008, type: swap [ 2.0103811] balloon0 at xenbus0 id 0: Xen Balloon driver [ 2.0103811] balloon0: current reservation: 499484 KiB [ 2.0103811] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 2.0103811] xbd1: backend features 0x1 [ 2.0103811] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0103811] balloon0: new target 524288 is above max 499484 [ 2.0103811] WARNING: 2 errors while detecting hardware; check system log. [ 2.0103811] boot device: dk0 [ 2.0103811] root on dk0 dumps on dk1 [ 2.0701232] root file system type: ffs [ 2.0801053] kern.module.path=/stand/i386/10.99.12/modules Wed Mar 26 22:17:51 UTC 2025 Starting root file system check: /dev/rdk0: file system is clean; not checking [ 3.2101247] entropy: best effort Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 3.7301046] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. postfix: warning: valid_hostname: empty hostname postfix: fatal: unable to use my own hostname Mar 26 22:18:32 postfix[1134]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Wed Mar 26 22:18:34 UTC 2025 Mar 26 22:18:34 getty[1200]: /dev/ttyE1: Device not configured Mar 26 22:18:34 getty[1206]: /dev/ttyE2: Device not configured Mar 26 22:18:34 getty[863]: /dev/ttyE3: Device not configured NetBSD/i386 (Amnesiac) (constty) login: NetBSD/i386 (Amnesiac) (constty) login: root Mar 26 22:18:34 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.12 (XEN3PAE_DOMU) #0: Tue Mar 25 03:15:32 UTC 2025 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-promp''t-1743027516.4103217# ' anita-root-shell-prompt-1743027516.4103217# df -k | sed 's/^/df-pre-test /'; mkd ir /tmp/tests && cd /usr/tests && { atf-run;df -k | sed 's/^/df-pre-test /'; mkd ir /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt  -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-resul ts.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-result s.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1 }'` -lt 90000 && test ` xl \ destroy \ anita-9792 Thu Mar 27 00:34:06 MET 2025