Thu Apr 24 23:16:56 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/floppy/boot7.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/gpufw.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/rescue.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/binary/kernel/netbsd-GENERIC.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-29017"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/download/i386/binary/kernel/netbsd-INSTALL.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 5117 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.14 (INSTALL) #0: Tue Apr 22 17:39:12 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 228 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20221020) [ 1.0000000] ACPI: FACS 0x00000000FC001000 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu1: node 0, package 0, core 1, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.3_20240909nb1 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20241212 [ 1.0000000] apm0 at acpi0: Power Management spec V1.2 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0000030] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0401025] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0401025] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0401025] xbd0: backend features 0x1 [ 1.0401025] balloon at xenbus0 id 0 not configured [ 1.0401025] xbd1: 540 MB, 512 bytes/sect x 1107160 sectors [ 1.0401025] xbd1: backend features 0x1 [ 1.0500421] swwdog0: software watchdog initialized [ 1.0500421] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0500421] WARNING: 2 errors while detecting hardware; check system log. [ 1.0500421] boot device: xbd0 [ 1.0500421] root on md0a dumps on md0b [ 1.0500421] root file system type: ffs [ 1.0500421] kern.module.path=/stand/i386/10.99.14/modules Created tmpfs /dev (1884160 byte, 3648 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                          [?7l [?7h NetBSD/i386 10.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Installation auf Deutsch (0x(B(0x(B c: Mensajes de instalacion en castellano (0x(B(0x(B d: Messages d'installation en français (0x(B(0x(B e: Komunikaty instalacyjne w jezyku polskim (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.14 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (541M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 89M without X and at least 339M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1744896 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1925053 sec.  a: 1744896 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1925053 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 5.5400503] entropy: best effort [ 5.5700472] dk0 at xbd0: "7e070d6b-de62-4aef-a135-d38984af7481", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk0 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk0: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the selected serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk0 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ---------------------------------- --------   a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes  tools No   None  sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes tools No  None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device  b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: File extension .tgz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tgz files.  election & retry    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set /source/sets d: File extension.tgz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 25690 KiB 68.72 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23600 KiB 59.13 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA32% |***********73216 KiB 71.41 M00:02 ETA45**** 99 MiB 49.5710033.313 ETA6*325.704 ETA851.125 ETA617.806 ETA50*105.7513.917 ETA2.378 ETA65*****444.445 ETA6*53.17772.31891.486 ETA9*530.93702417 9.852*8303608.9287*****9210.12 ETA 9.6169*78.955891201392*2087.7936641 ETA379** | 219550 ETA100*4 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 38.17 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA3% |*17280 KiB 16.76 M00:27 ETA664 8.5952 ETA4215687.001:04 ETA9525.3324 ETA2594.3942 ETA56240254 ETA6883.7159 ETA10% |***531846.4704 ETA15552019 ETA6195.4716 ETA2% |****6035347 ETA9284.9523 ETA353440920598 ETA61763034 ETA48864196 ETA7136008 ETA20*** 98 MiB 5.4408 ETA192311 ETA100024 ETA14.817 ETA6220 ETA3482 ETA315 ETA24187 ETA50430 ETA63.932 ETA796 ETA6**234.2521 ETA30*458407 ETA6719 ETA19665311 ETA2*52493372 ETA37623 ETA7*76703 ETA9*88820:58 ETA40*90759 ETA1671:00 ETA251 ETA1425432 ETA7392813 ETA6**219670:54 ETA828761 ETA9689*313405522 ETA50747803 ETA346**667543 ETA674 ETA933 ETA7574 ETA72334705 ETA8*6384 ETA15 ETA61*91480 ETA5*3096934 ETA1036*31455495 ETA7874 ETA1365 ETA82244 ETA299*30342 ETA75**566324 ETA7575 ETA266114 ETA462174396683***926117 ETA561606 ETA494940051053385 ETA492***386607 ETA1563436 ETA24615 ETA7475*5054 ETA17952 ETA100**| 472560 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/gpufw.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9290 KiB 44.06 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA50% |*****************7488 KiB 7.29 M00:00 ETA4*80643.931 ETA81**********120960 ETA3*35201100******| 1481022 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/rescue.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9340 KiB 11.26 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA27% |*********22784 KiB 22.16 M00:02 ETA8348811.385 ETA31*636 8.546 ETA7526.508 ETA4*88645.629 ETA92484.7411 ETA6*3020212 ETA8*21923.9241*49447878*************654726.302 ETA8565.8480*777514*704002851872009**52644.891 ETA92* | 7724870385255* | 80384350 ETA64013100**| 8374020 Finished   (0 (B (0 (B                     All selected distribution sets unpacked successfully.   Making device nodes ...    (0 (B (0 (B                    Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   Finished   (0 (B (0 (B                     The extraction of the selected sets for NetBSD-10.99.14 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B       The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters.    **************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 188.4200889] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.    a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.14 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 213.5300919] dk0 at xbd0 (7e070d6b-de62-4aef-a135-d38984af7481) deleted [ 213.5300919] dk0: detached NetBSD/i386 10.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.14 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-29017 Thu Apr 24 23:21:56 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202504221750Z/i386/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-502"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/download/i386/binary/kernel/netbsd-GENERIC.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202504221750Z-i386-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 8454 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.14 (GENERIC) #0: Tue Apr 22 17:39:12 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/GENERIC [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 478 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20221020) [ 1.0000000] ACPI: FACS 0x00000000FC001000 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu1: node 0, package 0, core 1, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.3_20240909nb1 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20241212 [ 1.0000000] apm0 at acpi0: Power Management spec V1.2 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000040] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0000040] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0000040] xbd1 at xenbus0xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0560532] id 51728: Xen Virtual Block Device Interface [ 1.0560561] xbd0: backend features 0x1 [ 1.0560561] dk0 at xbd0: "7e070d6b-de62-4aef-a135-d38984af7481", 3669888 blocks at 64, type: ffs [ 1.0560561] dk1 at xbd0: "bf32050f-0652-4cf9-ae99-336c4efd4932", 524288 blocks at 3669952, type: swap [ 1.0560561] balloon at xenbus0 id 0 not configured [ 1.0600559] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.0600559] xbd1: backend features 0x1 [ 1.0600559] swwdog0: software watchdog initialized [ 1.0600559] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0600559] WARNING: 2 errors while detecting hardware; check system log. [ 1.0600559] boot device: dk0 [ 1.0600559] root on dk0 dumps on dk1 [ 1.1000754] root file system type: ffs [ 1.1100409] kern.module.path=/stand/i386/10.99.14/modules Thu Apr 24 21:21:59 UTC 2025 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 2.9900719] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Apr 24 21:22:15 postfix[314]: fatal: unable to use my own hostname postfix: warning: valid_hostname: empty hostname postfix: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Thu Apr 24 21:22:16 UTC 2025 Apr 24 21:22:16 getty[455]: /dev/ttyE2: Device not configured NetBSD/i386 (Amnesiac) (constty) login: Apr 24 21:22:17 getty[458]: /dev/ttyE3: Device not configured Apr 24 21:22:17 getty[468]: /dev/ttyE1: Device not configured NetBSD/i386 (Amnesiac) (constty) login: root Apr 24 21:22:20 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.14 (GENERIC) #0: Tue Apr 22 17:39:12 UTC 2025 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-promp''t-1745529766.9781814# ' anita-root-shell-prompt-1745529766.9781814# df -k | sed 's/^/df-pre-test /'; mkd ir /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt  -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-resul ts.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-result s.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1 }'` -lt 90000 && test `