Sat May 3 23:21:37 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/floppy/boot7.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/gpufw.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/rescue.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/binary/kernel/netbsd-GENERIC.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-5179"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/download/i386/binary/kernel/netbsd-INSTALL.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 17365 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.14 (INSTALL) #0: Thu May 1 18:00:27 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 228 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20221020) [ 1.0000000] ACPI: FACS 0x00000000FC001000 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] cpu1: node 0, package 0, core 1, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.3_20240909nb1 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20241212 [ 1.0000000] apm0 at acpi0: Power Management spec V1.2 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0000030] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0100449] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0100449] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0100449] xbd0: backend features 0x1 [ 1.0100449] balloon at xenbus0 id 0 not configured [ 1.0100449] xbd1: 541 MB, 512 bytes/sect x 1109076 sectors [ 1.0100449] xbd1: backend features 0x1 [ 1.0100449] swwdog0: software watchdog initialized [ 1.0100449] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0100449] WARNING: 2 errors while detecting hardware; check system log. [ 1.0100449] boot device: xbd0 [ 1.0100449] root on md0a dumps on md0b [ 1.0100449] root file system type: ffs [ 1.0100449] kern.module.path=/stand/i386/10.99.14/modules Created tmpfs /dev (1884160 byte, 3648 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                          [?7l [?7h NetBSD/i386 10.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Installation auf Deutsch (0x(B(0x(B c: Mensajes de instalacion en castellano (0x(B(0x(B d: Messages d'installation en français (0x(B(0x(B e: Komunikaty instalacyjne w jezyku polskim (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.14 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (542M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 89M without X and at least 339M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1744896 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1925053 sec.  a: 1744896 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1925053 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B[ 5.4800551] entropy: best effort  a: No>b: Yes[ 5.5100495] dk0 at xbd0: "db7fcf51-522f-471d-92d5-aba0a140eb4f", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk0 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk0: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the selected serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk0 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ---------------------------------- --------   a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes  tools No   None  sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes  No ML) No  Yes  Yes  Yes tools No  None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device  b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: File extension .tgz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tgz files.  election & retry    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set /source/sets d: File extension.tgz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 25690 KiB 79.49 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23600 KiB 74.84 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA35% |************80832 KiB 78.82 M00:01 ETA4*** 100 MiB 49.712 ETA6*234.233 ETA325.784 ETA861.305 ETA17.816 ETA50*115.9324.007 ETA6****3675 ETA5*44423.177*82.3991.486 ETA9*530.96704217 9.858292*8.79407 ETA85****889.443 ETA7*92172 ETA38.783 ETA9*7572 ETA90241201072*27.7836631 ETA379** | 218520 ETA100*| 21945 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 14.10 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA212224 KiB 11.91 M00:38 ETA4% |*22140.7441 ETA592 7.321:01 ETA546406.0114 ETA66245.1925 ETA71364.4141 ETA6% |**30400234 ETA12963.8155 ETA7430478 ETA5392452:06 ETA8401817 ETA72480323 ETA11% |***536324.021:44 ETA5% |*****730245.0818 ETA2804.7624 ETA6672675 ETA7184439 ETA6502034 ETA9552086 ETA804483.9240 ETA7268841 ETA3456705 ETA23*** 109 MiB 4.7516 ETA10608 ETA24720 ETA332 ETA3185 ETA4407 ETA628 ETA73.930 ETA52102811 ETA74 ETA6*5693 ETA33**574.410 ETA381 ETA461523 ETA214 ETA525*036 ETA815 ETA93.936 ETA40**914.3504 ETA220041 ETA23912 ETA3*528613 ETA4816094 ETA10413.985 ETA236 ETA7*234.051 ETA51*45370:52 ETA02*233 ETA618834 ETA065 ETA35034 ETA13.995 ETA26 ETA55 ETA4876 ETA745 ETA61***894.2542 ETA9003 ETA152334087723*83.9730161438971**354.2532 ETA60159440092*381 ETA4402 ETA373.991 ETA59**764.2222 ETA80*8131 ETA1914732820 ETA0991819 ETA3*2490**426350 ETA1130009 ETA2635412*708 ETA163417 ETA100***| 472410 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/gpufw.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA51% |*****************4800 KiB 4.65 M00:00 ETA6**52482.541 ETA91************8512750 ETA100****| 929028 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14810 KiB 18.75 M00:00 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/rescue.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9380 KiB 46.75 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA12% |****10816 KiB 10.45 M00:07 ETA31392 5.5013 ETA6*42084.595 ETA77203.579 ETA20**78564183042.9622 ETA3*205484105654 ETA56***********4825.2207 ETA63***54400305 ETA56768038*90724.7970*606543*3616434 ETA5*483221656003.995 ETA8*796884 ETA80*9504764*7257623 ETA53728598*654452 ETA100*****| 86100890 Finished   (0 (B (0 (B                     All selected distribution sets unpacked successfully.   Making device nodes ...    (0 (B (0 (B                    Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   Finished   (0 (B (0 (B                     The extraction of the selected sets for NetBSD-10.99.14 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B       The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random chara**********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 202.9100668] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.    a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.14 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                   [ 218.8201056] dk0 at xbd0 (db7fcf51-522f-471d-92d5-aba0a140eb4f) deleted [ 218.8491524] dk0: detached NetBSD/i386 10.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.14 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-5179 Sat May 3 23:29:43 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202505012000Z/i386/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-25869"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/download/i386/binary/kernel/netbsd-GENERIC.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202505012000Z-i386-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 19925 Parsing config from /dev/null libxl: error: libxl_device.c:1181:device_backend_callback: Domain 839:unable to add device with path /local/domain/0/backend/vbd/839/51712 - rc -9 libxl: error: libxl_device.c:1181:device_backend_callback: Domain 839:unable to add device with path /local/domain/0/backend/vbd/839/51728 - rc -9 libxl: error: libxl_create.c:1685:domcreate_launch_dm: Domain 839:unable to add disk devices libxl: error: libxl_device.c:1181:device_backend_callback: Domain 839:unable to remove device with path /local/domain/0/backend/vbd/839/51712 - rc -9 libxl: error: libxl_device.c:1181:device_backend_callback: Domain 839:unable to remove device with path /local/domain/0/backend/vbd/839/51728 - rc -9 libxl: error: libxl_domain.c:1526:devices_destroy_cb: Domain 839:libxl__devices_destroy failed libxl: error: libxl_domain.c:354:libxl_domain_info: Domain 839:Getting domain info: No such process libxl: error: libxl_domain.c:1179:libxl__destroy_domid: Domain 839:Non-existant domain libxl: error: libxl_domain.c:1133:domain_destroy_callback: Domain 839:Unable to destroy guest libxl: error: libxl_domain.c:1060:domain_destroy_cb: Domain 839:Destruction of domain failed xl \ destroy \ anita-25869 Sat May 3 23:33:25 MEST 2025