Sat Aug 26 20:56:09 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-11817"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 26258 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_BETA (INSTALL_XEN3_DOMU) #0: Wed Aug 23 18:21:39 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 231 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.15.5nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0201228] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0312639] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0312639] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0312639] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0312639] xbd0: backend features 0x1 [ 1.0312639] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.0312639] balloon0: current reservation: 262144 KiB [ 1.0312639] xbd1: 444 MB, 512 bytes/sect x 909312 sectors [ 1.0312639] xbd1: backend features 0x1 [ 1.0312639] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0312639] balloon0: current reservation: 65536 pages => target: 65536 pages [ 1.0312639] WARNING: 2 errors while detecting hardware; check system log. [ 1.0312639] boot device: xbd0 [ 1.0312639] root on md0a dumps on md0b [ 1.0312639] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.0312639] root file system type: ffs [ 1.0312639] kern.module.path=/stand/amd64/10.0/modules Created tmpfs /dev (1835008 byte, 3552 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                [?7l [?7h NetBSD/amd64 10.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.0_BETA Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (444M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2 IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 17.9186932] dk0 at xbd0: "8c29cbb5-7e17-4684-a133-f4c062a9ad52", 524288 blocks at 3669952, type: swap [ 17.9186932] dk1 at xbd0: "e1067dfe-aa4d-4619-a49a-f428bc995e2f", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2 /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Configuration files (/etc) Yes f: Compiler tools No g: Games No h: Graphics driver firmware Yes i: Manual pages No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >f: Compiler tools No x: Install selected setsYes  f: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes   No   Yes  Yes  Yes  tools No   None   sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes  No   Yes  Yes  Ye tools No   None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue [ 22.2218524] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA[34% |***********| 9840 KiB 9.49 MiB/s 00:01 ETA76***************2206410.720 ETA100*********| 288301.18 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA38% |*************12276 KiB 11.92 M00:01 ETA83****************267652.230 ETA92*** | 29590 9.61100***| 32168.76 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA5% |*11991 KiB 11.73 M00:17 ETA10% |***249552.156 ETA9% |******432144.072 ETA28***645702.7131*711861.82*47340.64 ETA5*80439 8.96 ETA8*6483645 ETA42*9673503*86687.636 ETA746.628 ETA631920 ETA5.851 ETA4 98 M615***1196.116 ETA8**28304 ETA9025 ETA61*3534 ETA3*405.983 ETA6*62 ETA7508817070*61 ETA4*6440 ETA57201 ETA064.9077- stalled -6351396*941 00:11 ETA81**805609 ETA6**92756 ETA94**210962 ETA6*441 ETA9* | 221890 ETA7650100*47 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4540 KiB 12.58 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA212305 KiB 11.98 M00:44 ETA5% |*286043.8437 ETA6% |**365781.8843 ETA7442130.498 ETA89997 9.7351 ETA9% |***540807.541:05 ETA3966.5515 ETA5.9323 ETA332 ETA4.7943 ETA5938578 ETA13% |****734495.1532 ETA54714.95 ETA4832845.121 ETA5*7474.776 ETA8306541 ETA6954136937 ETA9* 106 MiB 5.1026 ETA84.958 ETA732 ETA9546 ETA3640 ETA214 ETA058 ETA21*1270 ETA5*3627 ETA6*45725 ETA857830 ETA8722 ETA31*728417 ETA522*8755221 ETA413 ETA305 ETA217 ETA19 ETA38577 ETA5*96331 ETA720618 ETA7289 ETA8*13327 ETA41*28530 ETA235808 ETA4*4615 ETA6556 ETA477 ETA398 ETA19 ETA1712 ETA13 ETA044 ETA55172 ETA6*61 ETA7600 ETA9*711906 ETA53*96420:57 ETA430145 ETA5*654 ETA71781 ETA362 ETA13 ETA204 ETA155 ETA0- stalled -03.968*215 00:57 ETA61*354.072 ETA3*492047 ETA5574 ETA6*6582 ETA77091 ETA873239 ETA9*818 ETA28239 ETA195040 ETA0672*981436 ETA44064 ETA103 ETA6*881 ETA8*302527 ETA281*4633 ETA3*581 ETA472740132 ETA096566100 ETA7*82215 ETA91*50340 ETA2*6309 ETA0727421326 ETA7*3283 ETA8*792 ETA869326301639470 ETA100*| 5484 Finished   (0 (B(0 (B                    [ 217.7690826] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA46% |****************21692 KiB 19.75 M00:01 ETA8**************403688.90 ETA100*****| 465807.6 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA83% |*****************************12293 KiB 11.90 M00:00 ETA100******| 1465033 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 10430 KiB 11.81 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA9% |***7609 KiB 7.35 M00:09 ETA18% |******14114038 ETA4164.7812 ETA9753.656 ETA50402.9620 ETA20*504543 ETA16268295 ETA27570166 ETA6**20606254 ETA33**58915419 ETA467123520 ETA5*735221 ETA6844102 ETA8*93711.924 ETA45**347972.119 ETA8*746367 ETA038 ETA1.949 ETA7521 ETA672 ETA0- stalled -5****4499584 00:16 ETA62*800994 ETA3*748775 ETA9044278*****604609708 ETA83**44082.055 ETA46621.995124496**** | 742952.091 ETA100**| 76880130 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-10.0_BETA is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters.     ********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 289.5621905] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.0_BETA is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 300.9802623] dk1 at xbd0 (e1067dfe-aa4d-4619-a49a-f428bc995e2f) deleted [ 300.9802623] dk1: detached NetBSD/amd64 10.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.0_BETA Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-11817 Sat Aug 26 21:03:37 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-12473"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/tests-results.img,xvdb,w'"'"']' child pid is 17749 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_BETA (XEN3_DOMU) #0: Wed Aug 23 18:21:39 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 483 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.15.5nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.1108840] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1108840] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.1209649] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.1209649] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.1209649] xbd0: backend features 0x1 [ 1.1301339] dk0 at xbd0: "e1067dfe-aa4d-4619-a49a-f428bc995e2f", 3669888 blocks at 64, type: ffs [ 1.1301339] dk1 at xbd0: "8c29cbb5-7e17-4684-a133-f4c062a9ad52", 524288 blocks at 3669952, type: swap [ 1.1301339] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.1301339] balloon0: current reservation: 524288 KiB [ 1.1401465] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.1401465] xbd1: backend features 0x1 [ 1.1401465] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1401465] balloon0: current reservation: 131072 pages => target: 131072 pages [ 1.1401465] WARNING: 2 errors while detecting hardware; check system log. [ 1.1401465] boot device: dk0 [ 1.1401465] root on dk0 dumps on dk1 [ 1.1502056] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.1701526] root file system type: ffs [ 1.1701526] kern.module.path=/stand/amd64/10.0/modules Sat Aug 26 19:03:43 UTC 2023 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 2.9701508] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Aug 26 19:03:51 postfix[1135]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Sat Aug 26 19:03:52 UTC 2023 Aug 26 19:03:53 getty[1263]: /dev/ttyE2: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: Aug 26 19:03:53 getty[1197]: /dev/ttyE1: Device not configured Aug 26 19:03:53 getty[1117]: /dev/ttyE3: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: root Aug 26 19:03:53 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.0_BETA (XEN3_DOMU) #0: Wed Aug 23 18:21:39 UTC 2023 Welcome to NetBSD! This is a beta release of NetBSD for testing. Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-pr''ompt-1693076634.13# ' anita-root-shell-prompt-1693076634.13# df -k | sed 's/^/df-pre-test /'; mkdir /t mp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee  /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o x ml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xs l /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css ; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` - lt 90000 && test `