Sat Oct 31 01:19:23 CET 2026 This is anita version 2.18 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-14697"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 26487 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.2_STABLE (INSTALL_XEN3_DOMU) #0: Sat Oct 24 11:33:47 UTC 2026 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 479 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.20.5-pre_20261015 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0100662] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0100662] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0100662] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0100662] xbd0: backend features 0x1 [ 1.0100662] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.0100662] balloon0: current reservation: 524288 KiB [ 1.0100662] xbd1: 479 MB, 512 bytes/sect x 982992 sectors [ 1.0200499] xbd1: backend features 0x1 [ 1.0200499] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0200499] balloon0: current reservation: 131072 pages => target: 131072 pages [ 1.0200499] WARNING: 2 errors while detecting hardware; check system log. [ 1.0200499] boot device: xbd0 [ 1.0200499] root on md0a dumps on md0b [ 1.0200499] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.0200499] root file system type: ffs [ 1.0200499] kern.module.path=/stand/amd64/10.2/modules Created tmpfs /dev (1835008 byte, 3552 inodes) [ 6.0500552] entropy: best effort erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 10.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.2_STABLE Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (480M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.        You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 2973696 (3145661) + /  b: 1048576  c: 25% /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 171965 sec.     a: 2973696 (3145661) + / >b: 1048576  b: 1048576 >c: 25% /tmp (tmpfs)  c: 25% /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 171965 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them.   Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 64 3145663 3145600 FFSv2 IN / b: 3145664 4194239 1048576 swap ------------ ------------ ------------ -------- ---- ---------------- d: Change input units (sectors/cylinders/MB/GB) e: Clone external partition(s) f: Cancel >x: Partition sizes ok                           Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 9.9500873] dk0 at xbd0: "a8749515-6926-48f1-81cb-b801f5c6c973", 3145600 blocks at 64, type: ffs                         Status: RunningCommand: /sbin/newfs -V2 -O 2 /dev/rdk0 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    /dev/rdk0: 1535.9MB (3145600 sectors) block size 16384, fragment size 2048using 9 cylinder groups of 170.67MB, 10923 blks, 21184 inodes. ...............................................................................Finished   (0 (B                     Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....       (0 (B                    Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk0 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   Finished   (0 (B(0 (B                    The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.   (0 (B (0 (B Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Configuration files (/etc) Yes f: Compiler tools No g: Games No h: Graphics driver firmware Yes i: Manual pages No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >f: Compiler tools No x: Install selected setsYes  f: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes No firmware Yes No Yes Yes Yestools No  None sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes Nofirmware Yes No Yes Yes Yetools No None  sets None sets o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                    Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets!  Enter the correct data manually, or insert a disk and retry.  Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device   b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files. election & retrya: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue    (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA38% |*************11005 KiB 10.73 M00:01 ETA100**********************| 288504.310 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA53% |******************16462 KiB 15.97 M00:00 ETA100*****************| 306906.03 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA6% |**16136 KiB 15.72 M00:15 ETA19% |******521976.92 ETA27***729157.740 ETA35***930308.1209 ETA44*** 113 M817 ETA52***349.156 ETA60***56525 ETA71***8220.273 ETA9***205482 ETA90****331.221 ETA9*** | 256380 ETA19.748.337.116.045.09100*4.84 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 18.09 M00:00 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA3% |*20500 KiB 19.88 M00:27 ETA473093.2240 ETA7% |**416734938 ETA872321.4844 ETA640 9.2955 ETA9% |***546838.886 ETA107860061:02 ETA82047.0910 ETA56.319 ETA5.6828 ETA1637 ETA4.7346 ETA3754 ETA06- stalled -61802 02:04 ETA3% |****79581851:39 ETA6*951925.4625 ETA9* 110 MiB 6.1413 ETA5.827 ETA5321 ETA265 ETA029 ETA4.80- stalled -64225093.9581685614 02:09 ETA22*26821:53 ETA6**44.2936 ETA30*698420 ETA3*855.112 ETA014 ETA64.896 ETA5*975.071 ETA84.952 ETA844 ETA6206902 ETA8*15.0308 ETA74.99 ETA810 ETA41*305.0005 ETA4.916 ETA188 ETA2739 ETA6510 ETA3571 ETA492 ETA413 ETA25354 ETA6**576804 ETA872870:58 ETA9*419 ETA5746671:00 ETA7252*93800:55 ETA474330184 ETA4335696*17800 ETA7217949 ETA250 ETA661 ETA5922 ETA463 ETA0- stalled -342839*39 00:53 ETA60*8340 ETA4*636042 ETA6*74839 ETA7536597588368 ETA71*98684 ETA9440003*1171 ETA44505502 ETA451363 ETA1- stalled -2737*3236 00:29 ETA81**54543 ETA3*676219 ETA8*92833 ETA9*842 ETA5031 ETA90830 ETA11209 ETA2*627798 ETA50669 ETA2584- stalled -046238512740174007413.9852896307752201 00:10 ETA5*32707 ETA748853 ETA100**| 559910 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA1740816.8646:01 ETA 8.41:31:39 ETA5.652:17:18 ETA4.243:02:57 ETA3.3948:36 ETA2.824:34:15 ETA4- stalled -11.88695441302113060.9948940773067520586431 374 KiB 10.991:10:01 ETA60% |*********************28277 KiB 807.73 00:22 ETA10**************| 46580 KiB 1.27 M00 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14700 KiB 17.51 M00:00 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA100% |***********************************| 10390 KiB 15.61 M00:00 Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                   0% || 00.00 KiB/s --:-- ETA15% |*****12387 KiB 12.06 M00:05 ETA33******269723.084 ETA49******397952.903 ETA74********604244.741 ETA92******* | 74441500 ETA100***| 808803.2 Finished   (0 (B(0 (B                    All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                   Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B              Finished   (0 (B(0 (B                      (0 (B(0 (B                   Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                  Finished   (0 (B(0 (B                    The extraction of the selected sets for NetBSD-10.2_STABLE is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B      The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                     This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now!  You may use random data generated on another computer and load it here, or you could enter random characters manually.  If you have a USB random number device, connect it now and select the "Re-test" option.  >a: Manually input random characters  b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue! Enter one line of random characters.           ******************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** [ 289.7001639] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                    Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.2_STABLE is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.  At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.           (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                   Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B              Finished   (0 (B (0 (B                   [ 297.0301572] dk0 at xbd0 (a8749515-6926-48f1-81cb-b801f5c6c973) deleted [ 297.0301572] dk0: detached NetBSD/amd64 10.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-14697 Sat Oct 31 01:26:09 CET 2026 This is anita version 2.18 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/20261024113347Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-16443"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-20261024113347Z-amd64-+a4c35c48/tests-results.img,xvdb,w'"'"']' child pid is 13977 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.2_STABLE (XEN3_DOMU) #0: Sat Oct 24 11:33:47 UTC 2026 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 484 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.20.5-pre_20261015 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 2.0000435] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0000435] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 2.0000435] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 2.0000435] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 2.0000435] xbd0: backend features 0x1 [ 2.0100478] dk0 at xbd0: "a8749515-6926-48f1-81cb-b801f5c6c973", 3145600 blocks at 64, type: ffs [ 2.0100478] dk1 at xbd0: "82af7923-b1ef-4440-adf9-add9dd0c359b", 1048576 blocks at 3145664, type: swap [ 2.0100478] balloon0 at xenbus0 id 0: Xen Balloon driver [ 2.0100478] balloon0: current reservation: 524288 KiB [ 2.0100478] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 2.0100478] xbd1: backend features 0x1 [ 2.0100478] xenbus0: can't get state for device/suspend/event-channel (2) [ 2.0100478] balloon0: current reservation: 131072 pages => target: 131072 pages [ 2.0100478] WARNING: 2 errors while detecting hardware; check system log. [ 2.0100478] boot device: dk0 [ 2.0100478] root on dk0 dumps on dk1 [ 2.0100478] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 2.0300946] root file system type: ffs [ 2.0300946] kern.module.path=/stand/amd64/10.2/modules Sat Oct 31 00:26:14 UTC 2026 Starting root file system check: [ 2.8400494] entropy: best effort /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 3.2501290] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. postfix: warning: valid_hostname: empty hostname Oct 31 00:26:20 postfix[1055]: fatal: unable to use my own hostname postfix: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Sat Oct 31 00:26:22 UTC 2026 Oct 31 00:26:22 getty[1110]: /dev/ttyE2: Device not configured Oct 31 00:26:22 getty[1206]: /dev/ttyE3: Device not configured Oct 31 00:26:22 getty[1183]: /dev/ttyE1: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: NetBSD/amd64 (Amnesiac) (constty) login: root Oct 31 00:26:22 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.2_STABLE (XEN3_DOMU) #0: Sat Oct 24 11:33:47 UTC 2026 Welcome to NetBSD! We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-promp''t-1793406383.4720018# ' anita-root-shell-prompt-1793406383.4720018# t=/var/tmp; df -k | sed 's/^/df-pre- test /'; mkdir $t/tests && cd /usr/tests && { atf-run; echo $? >$t/tests/test.st atus; } | tee $t/tests/test.tps | atf-report -o ticker:- -o ticker:$t/tests/test .txt -o xml:$t/tests/test.xml; (cd $t && for f in /usr/share/xsl/atf/tests-resul ts.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-result s.css; do cp $f tests/; done;); { cd $t && test `du -sk tests | awk '{print $1}' ` -lt 90000 && test `