Sat Aug 26 20:33:58 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/binary/kernel/netbsd-GENERIC.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-5676"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 27523 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_BETA (INSTALL) #0: Wed Aug 23 18:21:39 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 220 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001000 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.15.5nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0245112] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0245112] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0245112] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0453423] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0453423] xbd0: backend features 0x1 [ 1.0502825] balloon at xenbus0 id 0 not configured [ 1.3802820] xbd1: 444 MB, 512 bytes/sect x 909312 sectors [ 1.3802820] xbd1: backend features 0x1 [ 1.3802820] swwdog0: software watchdog initialized [ 1.3802820] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.3802820] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.3802820] WARNING: 3 errors while detecting hardware; check system log. [ 1.3802820] boot device: xbd0 [ 1.3802820] root on md0a dumps on md0b [ 1.3802820] root file system type: ffs [ 1.3802820] kern.module.path=/stand/amd64/10.0/modules Created tmpfs /dev (1835008 byte, 3552 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                [?7l [?7h NetBSD/amd64 10.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.0_BETA Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (444M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2 IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 31.7131931] dk0 at xbd0: "13327f04-f333-47d9-986d-758552fd86ad", 524288 blocks at 3669952, type: swap [ 31.7131931] dk1 at xbd0: "538b3fef-cede-451a-a561-f578ca251a02", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2 /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes.  ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Configuration files (/etc) Yes f: Compiler tools No g: Games No h: Graphics driver firmware Yes i: Manual pages No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >f: Compiler tools No x: Install selected setsYes  f: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes   No   Yes  Yes  Yes  tools No   None   sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes  No   Yes  Yes  Ye tools No   None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue [ 37.2031993] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA30% |**********8782 KiB 8.59 M00:02 ETA77****************22377.260 ETA100*********| 2883043 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA28% |*********9102 KiB 8.33 M00:02 ETA56**********1823721 ETA8***********279289.050 ETA100*****| 321608.61 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA3% |*7275 KiB 7.04 M00:30 ETA496774.348 ETA5116703.6956 ETA6% |**4582538 ETA9% |***211334.1049 ETA1032283.7652 ETA15331525 ETA5% |*****348394.2444 ETA20**465315538 ETA3*52917745 ETA3335378 ETA56836296*986209*671845 ETA317181414 ETA3*629803 ETA7*84259590 ETA41**93346028 ETA3*85727 ETA7* 105 M853 ETA86704 ETA51*15861 ETA7**269419 ETA7808*97160*3428 ETA5*45915 ETA7*94 ETA8528471*873 ETA5**675.010 ETA694.928*738909 ETA80*88 ETA18144*7757 ETA7*9385 ETA9*74 ETA9120273*782 ETA100***| 221920 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4540 KiB 8.24 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA19427 KiB 9.07 M00:59 ETA3% |*20196823 ETA5838156 ETA322597.681:07 ETA6% |**7742359 ETA7421116.8414 ETA86670418 ETA9% |***51708289 ETA1064901220 ETA89915.755 ETA162222518 ETA2% |****7037694 ETA49409319 ETA84274875*9019787 98 MiB 6.123 ETA9*1093908 ETA21*20644 ETA2613 ETA3*9484 ETA537523 ETA6*4591 ETA854710:58 ETA9*6257 ETA30836 ETA17425 ETA3*8393 ETA5*92861 ETA6201930 ETA7849 ETA8*118240*23976 ETA23085 ETA3*794 ETA4457.003 ETA596.936*5612 ETA86570 ETA9*737.0039 ETA52*86166 ETA3900916.947 ETA47886 ETA5*304905 ETA61114 ETA8*943 ETA924892 ETA60*3071 ETA1790 ETA97824061 ETA4*517529 ETA5977 ETA7*67806 ETA873795 ETA9*82834 ETA72*98981 ETA34023411519 ETA6*78 ETA8*287.027 ETA80*42144 ETA25153 ETA4*63231 ETA6*753109 ETA8858 ETA90*997 ETA702*50415 ETA311048294 ETA5*2263 ETA6832 ETA73421 ETA8* | 540094160 ETA100*| 5483 Finished   (0 (B(0 (B                    [ 175.1547247] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA23% |********10804 KiB 10.36 M00:03 ETA54**********252111.701 ETA70******327260.682****8501 9.370 ETA96***** | 447478.72100**| 4658049 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA34% |***********5008 KiB 4.85 M00:01 ETA6***********944556100*************| 14650800 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA47% |****************4955 KiB 4.81 M00:01 ETA88**************921630 ETA100*****| 104305.01 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA8% |**6695 KiB 6.47 M00:10 ETA12% |****98564.813 ETA4110343.627 ETA6*26080820 ETA23***83906115 ETA3***259654.221 ETA7*87700143***33683120 ETA8*70960309 ETA50*91773.84*421747563****895217 ETA71**54869905 ETA7**975654 ETA9*61304803 ETA83**4533769**857072 ETA93* | 7167121 ETA7* | 75220 ETA100**| 7688068 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-10.0_BETA is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters. ***********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 256.7150594] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.0_BETA is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 262.5984521] dk1 at xbd0 (538b3fef-cede-451a-a561-f578ca251a02) deleted [ 262.5984521] dk1: detached NetBSD/amd64 10.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.0_BETA Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-5676 Sat Aug 26 20:41:24 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-10/202308232140Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-7288"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-GENERIC.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-10-202308232140Z-amd64-+a4c35c48/tests-results.img,xvdb,w'"'"']' child pid is 12954 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_BETA (GENERIC) #0: Wed Aug 23 18:21:39 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 468 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001000 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.15.5nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0115760] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0207111] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0310665] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0310665] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0310665] xbd0: backend features 0x1 [ 1.0402618] balloon at xenbus0 id 0 not configured [ 1.2602626] dk0 at xbd0: "538b3fef-cede-451a-a561-f578ca251a02", 3669888 blocks at 64, type: ffs [ 4.5202633] dk1 at xbd0: "13327f04-f333-47d9-986d-758552fd86ad", 524288 blocks at 3669952, type: swap [ 4.5311546] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 4.5311546] xbd1: backend features 0x1 [ 4.9711535] swwdog0: software watchdog initialized [ 4.9711535] xenbus0: can't get state for device/suspend/event-channel (2) [ 4.9804156] xenbus0: can't get state for device/suspend/event-channel (2) [ 5.6602616] WARNING: 3 errors while detecting hardware; check system log. [ 5.6602616] boot device: dk0 [ 5.7202617] root on dk0 dumps on dk1 [ 6.1202668] entropy: best effort [ 6.5902616] root file system type: ffs [ 6.6502620] kern.module.path=/stand/amd64/10.0/modules Sat Aug 26 18:42:14 UTC 2023 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 91.3804469] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Aug 26 18:43:32 postfix[2599]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Sat Aug 26 18:43:34 UTC 2023 NetBSD/amd64 (Amnesiac) (constty) login: Aug 26 18:43:35 getty[322]: /dev/ttyE3: Device not configured Aug 26 18:43:35 getty[320]: /dev/ttyE1: Device not configured Aug 26 18:43:35 getty[321]: /dev/ttyE2: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: root Aug 26 18:43:35 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.0_BETA (GENERIC) #0: Wed Aug 23 18:21:39 UTC 2023 Welcome to NetBSD! This is a beta release of NetBSD for testing. Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-pr''ompt-1693075416.35# ' anita-root-shell-prompt-1693075416.35# df -k | sed 's/^/df-pre-test /'; mkdir /t mp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee  /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o x ml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xs l /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css ; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` - lt 90000 && test `