Wed Aug 20 01:55:50 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/base32.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/base32.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-22685"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 24522 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.0_BETA (INSTALL_XEN3_DOMU) #0: Fri Aug 8 16:37:51 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 231 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.5_20250521nb1 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.1100642] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1100642] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.1100642] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.1100642] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.1100642] xbd0: backend features 0x1 [ 1.1200633] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.1200633] balloon0: current reservation: 262144 KiB [ 1.1200633] xbd1: 518 MB, 512 bytes/sect x 1062336 sectors [ 1.1200633] xbd1: backend features 0x1 [ 1.1200633] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1200633] balloon0: current reservation: 65536 pages => target: 65536 pages [ 1.1200633] WARNING: 2 errors while detecting hardware; check system log. [ 1.1200633] boot device: xbd0 [ 1.1200633] root on md0a dumps on md0b [ 1.1200633] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.1200633] root file system type: ffs [ 1.1200633] kern.module.path=/stand/amd64/11.0/modules Created tmpfs /dev (1835008 byte, 3552 inodes) [ 5.9100652] entropy: best effort erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                          [?7l [?7h NetBSD/amd64 11.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Installation auf Deutsch (0x(B(0x(B c: Mensajes de instalacion en castellano (0x(B(0x(B d: Messages d'installation en français (0x(B(0x(B e: Komunikaty instalacyjne w jezyku polskim (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-11.0_BETA Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD? The most common disk types are:- wd: SATA, ATA, or IDE- sd: SCSI or removable USB disk- ld: NVMe (e.g. M.2 card), SD/MMC card, or virtual disk (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (519M) (0x(B(0x(B c: Extended partitioning (software RAID, etc...) (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 11.7801010] dk0 at xbd0: "52d85b0c-cdeb-445b-9853-9d7de802f7ce", 524288 blocks at 3669952, type: swap [ 11.7801010] dk1 at xbd0: "bbe27ff3-41cc-4979-b28a-6f6b2824fe9a", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the selected serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ---------------------------------- --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Base 32-bit compatibility libraries No f: Configuration files (/etc) Yes g: Compiler tools No h: Games No i: Graphics driver firmware Yes j: Manual pages No k: Manual pages (HTML) No l: Miscellaneous No m: Recovery tools No n: Test programs No o: Text processing tools No p: X11 sets None q: Source and debug sets None >x: Install selected sets >e: Base 32-bit compatibility libraries No x: Install selected setsYes  e: Base 32-bit compatibility libraries Yes >g: Compiler tools No Yes  g: Compiler tools Yes >l: Miscellaneous No Yes  l: Miscellaneous Yes >m: Recovery tools No Yes  m: Recovery tools Yes >n: Test programs No Yes  n: Test programs Yes >p: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bles (/etc) Yes  Yes  No firmware Yes  No ML) No  Yes   Yes   Yes tools No  p: X11 sets None >q: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bles (/etc) Yes  Yes  No firmware Yes  No ML) No  Yes  Yes  Yes  tools No   None  sets None  q: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 10, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA41% |**************11968 KiB 11.67 M00:01 ETA221896100*********************| 289704.780 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA33% |***********11271 KiB 10.95 M00:01 ETA43978662**********20572 9.9294*********** | 3121510.070 ETA100***| 3318031 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA5% |*13239 KiB 12.82 M00:17 ETA11% |***28793.934 ETA9% |******4645.042 ETA25**606034.721 ETA9**700763.662 ETA4121.424 ETA716 9.836 ETA9728.649 ETA11647.7021 ETA406.953 ETA75635 ETA30215.868 ETA3129489 ETA5**84181866 ETA398487 ETA149 ETA4.831 ETA573 ETA335 ETA11- stalled -9*9552143 00:31 ETA45** 106 M8226 ETA7*1155 ETA2666 ETA487 ETA328 ETA8179 ETA30430 ETA9*53.9929 ETA55**304.343 ETA214 ETA1095 ETA3.966 ETA85747 ETA638 ETA549 ETA430 ETA35- stalled -2761**4451 00:25 ETA9***638718 ETA74*754.064 ETA3.975 ETA880737*8293 ETA14 ETA64570435 ETA3784***986109 ETA9**210756 ETA6992*7744 ETA6842193 ETA357146035- stalled -0227 00:03 ETA100***| 234410 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base32.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA42% |**************18200 KiB 17.70 M00:01 ETA78*************334486.210 ETA95****** | 40483.1100**| 424802.65 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA1740816.9304:54 ETA 8.449:51 ETA5.614:45 ETA4.229:41 ETA91% |******************************* | 4569 KiB 909.4100:00 ETA100****| 501084.99 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA112747 KiB 12.35 M00:51 ETA3% |*230201.146 ETA48662 9.271:06 ETA330338.0216 ETA561127.0426 ETA6% |**409366.6531 ETA15025.7844 ETA766565 ETA99044050 ETA85329224 ETA7020056 ETA2274.62:07 ETA2917 ETA3.9828 ETA7238 ETA4949 ETA2859 ETA10- stalled -2.93796653423239% |***604346 04:19 ETA1070746553:46 ETA3% |****88713.0901 ETA5* 99 M422:39 ETA1013741 ETA664337 ETA3441 ETA726 ETA9*236224 ETA742 ETA8556 ETA479 ETA93932 ETA21*406020 ETA3*97313 ETA50655 ETA588 ETA1121 ETA443 ETA376 ETA030 ETA233 ETA166 ETA099 ETA46220 ETA8*856307 ETA30*94740 ETA5682 ETA633 ETA7595 ETA1204641 ETA2*12711:56 ETA668 ETA02:00 ETA424741:52 ETA503 ETA645 ETA587 ETA29 ETA472:01 ETA23 ETA37- stalled -7*3952 01:55 ETA40**617841 ETA168039 ETA7118 ETA779 ETA22340 ETA4*888932 ETA907513783 ETA44 ETA696 ETA47 ETA08 ETA559 ETA141 ETA349680 ETA9**3207227 ETA5134841 ETA2*730 ETA343618 ETA429 ETA785*59913 ETA66302 ETA863 ETA24 ETA7845 ETA16 ETA677 ETA30- stalled -8 01:17 ETA9*85730 ETA61*988205 ETA240343 ETA3*961 ETA41470:59 ETA7652387 ETA6*3934 ETA7523 ETA6894 ETA525 ETA7956 ETA2697 ETA6844704 ETA70*5560 ETA2*708545 ETA483921 ETA6*94938 ETA677 ETA748 ETA18*51194 ETA974.012 ETA80*83.9852893 ETA631784 ETA5- stalled -2127 00:31 ETA4*509024 ETA8*724.0318 ETA527 ETA9*8146 ETA902133.992*994.071 ETA601633213.9863088546*219306 ETA8* | 6364.002 ETA94420 ETA100*| 6474 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA1740816.9745:43 ETA21% |*******0200 KiB 4.95 M00:07 ETA80*********************374912.10 ETA93**** | 435960.616* | 45152 8.7973337.366.315.524.9142100**| 465801304 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14820 KiB 18.31 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 11890 KiB 15.55 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA13% |****12969 KiB 12.58 M00:06 ETA9**8548 8.98 ETA22*2156610 ETA3*2285.413 ETA547514.84 ETA027 ETA3.4420 ETA30**95085917 ETA6**35220815 ETA7732486 ETA6164208 ETA8*8562.999 ETA41*964078 ETA4*4246957 ETA8*596086 ETA9*75588954*522803.004 ETA5722.849**6760913 ETA60*794825*62291 ETA6*3328074960750 ETA8537661 ETA9542 ETA362703 ETA1205- stalled -1.9938727726735951489*6467 00:19 ETA85*****81695707 ETA96**** | 92417961 ETA100**| 956602.010 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: /usr/sbin/certctl rehash (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                   Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-11.0_BETA is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters. ******************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************   [ 375.1102244] entropy: ready   Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd (Secure Shell daemon) NO h: Enable ntpd to sync time over network NO i: Run ntpdate to set time over network at boot NO j: Enable multicast DNS support NO k: Enable xdm (X Display Manager) NO l: Enable cgd (cryptographic disk configuration) YES m: Enable lvm (Logical Volume Manager) NO n: Enable raidframe YES o: Add a user p: Run /bin/sh >x: Finished configuring  The installation of NetBSD-11.0_BETA is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.        (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 381.9101649] dk1 at xbd0 (bbe27ff3-41cc-4979-b28a-6f6b2824fe9a) deleted [ 381.9101649] dk1: detached NetBSD/amd64 11.0_BETA This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-11.0_BETA Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-22685 Wed Aug 20 02:03:42 MEST 2025 This is anita version 2.13 Using pexpect version 4.9.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-11/20250808163751Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-5207"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-11-20250808163751Z-amd64-+a4c35c48/tests-results.img,xvdb,w'"'"']' child pid is 29154 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.0_BETA (XEN3_DOMU) #0: Fri Aug 8 16:37:51 UTC 2025 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 483 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.18.5_20250521nb1 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, id 0x206c2 [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0100580] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0100580] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0100580] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0100580] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0100580] xbd0: backend features 0x1 [ 1.0100580] dk0 at xbd0: "bbe27ff3-41cc-4979-b28a-6f6b2824fe9a", 3669888 blocks at 64, type: ffs [ 1.0100580] dk1 at xbd0: "52d85b0c-cdeb-445b-9853-9d7de802f7ce", 524288 blocks at 3669952, type: swap [ 1.0100580] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.0100580] balloon0: current reservation: 524288 KiB [ 1.0100580] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.0100580] xbd1: backend features 0x1 [ 1.0200567] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0200567] balloon0: current reservation: 131072 pages => target: 131072 pages [ 1.0200567] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0200567] WARNING: 3 errors while detecting hardware; check system log. [ 1.0200567] boot device: dk0 [ 1.0200567] root on dk0 dumps on dk1 [ 1.0200567] Your machine does not initialize mem_clusters; sparse_dumps disabled [ 1.0501097] root file system type: ffs [ 1.0600806] kern.module.path=/stand/amd64/11.0/modules Wed Aug 20 00:03:46 UTC 2025 [ 3.1800494] entropy: best effort Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 4.6600518] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Aug 20 00:03:56 postfix[1050]: fatal: unable to use my own hostname postfix: warning: valid_hostname: empty hostname postfix: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Wed Aug 20 00:03:57 UTC 2025 Aug 20 00:03:58 getty[1261]: /dev/ttyE3: Device not configured Aug 20 00:03:58 getty[1178]: /dev/ttyE1: Device not configured Aug 20 00:03:58 getty[1141]: /dev/ttyE2: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: NetBSD/amd64 (Amnesiac) (constty) login: root Aug 20 00:03:59 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 11.0_BETA (XEN3_DOMU) #0: Fri Aug 8 16:37:51 UTC 2025 Welcome to NetBSD! This is a beta release of NetBSD for testing. Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-promp''t-1755648243.9689593# ' anita-root-shell-prompt-1755648243.9689593# df -k | sed 's/^/df-pre-test /'; mkd ir /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt  -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-resul ts.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-result s.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1 }'` -lt 90000 && test `