source: soft/giet_vm/giet_drivers/sdc_driver.h @ 732

///////////////////////////////////////////////////////////////////////////////////
// File     : sdc_driver.h
// Date     : 31/08/2012
// Author   : cesar fuguet
// Copyright (c) UPMC-LIP6
///////////////////////////////////////////////////////////////////////////////////
// The sdc_driver.c and sdc_driver.h files are part ot the GIET-VM kernel.
// This driver supports the SocLib VciAhciSdc component, that is a single channel,
// block oriented, SD card contrÃŽler, respecting the AHCI standard.
//
// 1. This driver supports only SD Cards V2 and higher, and the block
//    size must be 512 bytes.
// 
// 2. The VciAhciSdc component supports several simultaneous commands,
//    and each command can be split in several physical memory buffers,
//    but this driver supports only commands containing one single buffer.
//
// 3. The "command list" can contain up to 32 independant commands, posted
//    by different user tasks. These independant transfers are handled 
//    by the AHCI_SDC device in the same order as they have been written by the
//    driver(s) in the command list. There is no global lock protecting the
//    the HBA device, but the command list being a shared structure, the driver
//    must use an atomic_increment() to get a slot in the command list,
//    and increment the write pointer.
//
// 4. This driver implements two operating mode: 
//    - In synchronous mode, the calling task poll the   AHCI_PXCI register to
//    detect the command completion (busy waiting). 
//    - In descheduling mode, the calling task is descheduled, and must be
//    restart when the command is completed.
// 
// 5. As several user tasks can concurrently register commands in the command
//    list, and there is only one HBA interrupt, this interrupt is not linked
//    to a specific task. In descheduling mode, the HBA IRQ is a "global" IRQ
//    that is statically routed to processor P[x_io,y_io,0] in cluster_io. 
//    The associated global   AHCI_ISR send a WAKUP WTI to all tasks that have
//    a completed command. This   AHCI_ISR uses a read pointer on the command 
//    to identify the first expected command completion. The incrementation 
//    of this read pointer does not require atomic_increment as there is
//    no concurrent access for this pointer. 
//
// The SEG_IOC_BASE virtual address must be defined in the hard_config.h file.
///////////////////////////////////////////////////////////////////////////////////

#ifndef _GIET_SDC_DRIVER_H_
#define _GIET_SDC_DRIVER_H_

/////////////////////////////////////////////////////////////////////////////
//    SDC Addressable Registers (up to 64 registers)
/////////////////////////////////////////////////////////////////////////////

enum SoclibSdcRegisters
{
    SDC_PERIOD       = 32,          // system cycles       / Write-Only
    SDC_CMD_ID       = 33,          // command index       / Write-Only
    SDC_CMD_ARG      = 34,          // command argument    / Write-Only
    SDC_RSP_STS      = 35,          // response status     / Read-Only
};

/////////////////////////////////////////////////////////////////////////////
//    Software supported SDC commands
/////////////////////////////////////////////////////////////////////////////

enum SoclibSdcCommands
{
    SDC_CMD0         = 0,           // Soft reset
    SDC_CMD3         = 3,           // Relative Card Address
    SDC_CMD7         = 7,           // Toggle mode
    SDC_CMD8         = 8,           // Voltage info 
    SDC_CMD41        = 41,          // Operation Condition
};

enum SoclibSdcErrorCodes
{
    SDC_ERROR_LBA    = 0x40000000,  // LBA larger tnan SD card capacity
    SDC_ERROR_CRC    = 0x00800000,  // CRC error reported by SD card
    SDC_ERROR_CMD    = 0x00400000,  // command notsupported by SD card
};
           
///////////////////////////////////////////////////////////////////////////////
//      Various SD Card constants
///////////////////////////////////////////////////////////////////////////////

#define SDC_CMD8_ARGUMENT   0x00000155  // VHS = 2.7-3.6 V / check = 0x55
#define SDC_CMD41_ARGUMENT  0x40000000  // High Capacity Host Support 
#define SDC_CMD41_RSP_BUSY  0x80000000  // Card Busy when 0     
#define SDC_CMD41_RSP_CCS   0x40000000  // High Capacity when 1
 
/////////////////////////////////////////////////////////////////////////////
//    AHCI Addressable Registers 
/////////////////////////////////////////////////////////////////////////////

enum SoclibAhciRegisters 
{
    AHCI_PXCLB       = 0,           // command list base address 32 LSB bits
    AHCI_PXCLBU      = 1,           // command list base address 32 MSB bits
    AHCI_PXIS        = 4,           // interrupt status
    AHCI_PXIE        = 5,           // interrupt enable
    AHCI_PXCMD       = 6,           // run
    AHCI_PXCI        = 14,          // command bit-vector     
};

/////////////////////////////////////////////////////////////////////////////
// AHCI structures for Command List
/////////////////////////////////////////////////////////////////////////////

/////// command descriptor  ///////////////////////
typedef struct ahci_cmd_desc_s  // size = 16 bytes
{
    unsigned char       flag[2];    // W in bit 6 of flag[0]
    unsigned char       prdtl[2];       // Number of buffers
    unsigned int        prdbc;          // Number of bytes actually transfered
    unsigned int        ctba;           // Command Table base address 32 LSB bits
    unsigned int        ctbau;          // Command Table base address 32 MSB bits
} ahci_cmd_desc_t;


/////////////////////////////////////////////////////////////////////////////
// AHCI structures for Command Table
/////////////////////////////////////////////////////////////////////////////

/////// command header  ///////////////////////////////
typedef struct ahci_cmd_header_s     // size = 16 bytes
{
    unsigned int        res0;       // reserved 
    unsigned char           lba0;           // LBA 7:0
    unsigned char           lba1;           // LBA 15:8
    unsigned char           lba2;           // LBA 23:16
    unsigned char           res1;           // reserved
    unsigned char           lba3;           // LBA 31:24
    unsigned char           lba4;           // LBA 39:32
    unsigned char           lba5;           // LBA 47:40
    unsigned char           res2;           // reserved
    unsigned int        res3;       // reserved 
} ahci_cmd_header_t;

/////// Buffer Descriptor //////////////////////////
typedef struct ahci_cmd_buffer_s // size = 16 bytes
{
    unsigned int        dba;        // Buffer base address 32 LSB bits
    unsigned int        dbau;       // Buffer base address 32 MSB bits
    unsigned int        res0;       // reserved
    unsigned int        dbc;        // Buffer bytes count
} ahci_cmd_buffer_t;

/////// command table /////////////////////////////////
typedef struct ahci_cmd_table_s     // size = 32 bytes
{
    ahci_cmd_header_t   header;     // contains LBA value
    ahci_cmd_buffer_t   buffer;     // contains buffer descriptor
} ahci_cmd_table_t;


///////////////////////////////////////////////////////////////////////////////
// This function initializes the AHCI_SDC controller and the SD Card.
// Returns 0 if success, > 0 if failure
///////////////////////////////////////////////////////////////////////////////

unsigned int _sdc_init();

///////////////////////////////////////////////////////////////////////////////
// Transfer data between the block device and a memory buffer. 
// - use_irq   : polling strategy when zero
// - to_mem    : to memory if non zero
// - lba       : first block index on the block device
// - buf_vaddr : base address of the memory buffer
// - count     : number of blocks to be transfered.
// Returns 0 if success, > 0 if error.
///////////////////////////////////////////////////////////////////////////////

unsigned int _sdc_access( unsigned int       use_irq,  
                          unsigned int       to_mem,
                          unsigned int       lba,
                          unsigned long long buf_vaddr,
                          unsigned int       count);

///////////////////////////////////////////////////////////////////////////////
// This ISR handles the IRQ generated by the AHCI_SDC controler.
///////////////////////////////////////////////////////////////////////////////

void _sdc_isr( unsigned int irq_type,
               unsigned int irq_id,
               unsigned int channel );

#endif

// Local Variables:
// tab-width: 4
// c-basic-offset: 4
// c-file-offsets:((innamespace . 0)(inline-open . 0))
// indent-tabs-mode: nil
// End:
// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4