Context Navigation

giet.S @ 888

Last change on this file since 888 was 744, checked in by cfuguet, 10 years ago

giet_tsar: using CLUSTER_IO constant in stdio functions

Erasing also extra end-of-line spaces

File size: 17.4 KB

Rev	Line
[622]	1	/********************************************************************************
	2	* File : giet.S
	3	* Author : Alain Greiner
	4	* Date : 15/01/2014
	5	*********************************************************************************
[744]	6	* This is a very simple Interrupts/Exception/Traps handler for a generic
[622]	7	* multi-clusters / multi-processors TSAR architecture (up to 256 clusters,
[744]	8	* up to 4 processors per cluster).
[622]	9	* The physical address is 40 bits, and the 8 MSB bits A[39:32] define the
	10	* cluster index.
	11	********************************************************************************/
	12
	13	#include "hard_config.h"
	14
	15	.section .giet,"ax",@progbits
	16	.align 2
[744]	17	.global _interrupt_vector
[622]	18
	19	.extern seg_xcu_base
	20	.extern seg_tty_base
	21
	22	.extern _procid
	23	.extern _proctime
	24	.extern _tty_write
	25	.extern _tty_read
	26	.extern _tty_read_irq
	27	.extern _locks_read
	28	.extern _locks_write
	29	.extern _exit
	30	.extern _fb_sync_write
	31	.extern _fb_sync_read
	32	.extern _ioc_write
	33	.extern _ioc_read
	34	.extern _ioc_completed
	35	.extern _itoa_hex
	36	.extern _barrier_init
	37	.extern _barrier_wait
	38
	39	.ent _giet
	40
	41	/****************************************************************
	42	* Cause Table (indexed by the Cause register)
	43	****************************************************************/
	44	tab_causes:
	45	.word _int_handler /* 0000 : external interrupt */
	46	.word _cause_ukn /* 0001 : undefined exception */
	47	.word _cause_ukn /* 0010 : undefined exception */
	48	.word _cause_ukn /* 0011 : undefined exception */
	49	.word _cause_adel /* 0100 : illegal address read exception */
	50	.word _cause_ades /* 0101 : illegal address write exception */
	51	.word _cause_ibe /* 0110 : instruction bus error exception */
	52	.word _cause_dbe /* 0111 : data bus error exception */
	53	.word _sys_handler /* 1000 : system call */
	54	.word _cause_bp /* 1001 : breakpoint exception */
	55	.word _cause_ri /* 1010 : illegal codop exception */
	56	.word _cause_cpu /* 1011 : illegal coprocessor access */
	57	.word _cause_ovf /* 1100 : arithmetic overflow exception */
	58	.word _cause_ukn /* 1101 : undefined exception */
	59	.word _cause_ukn /* 1110 : undefined exception */
	60	.word _cause_ukn /* 1111 : undefined exception */
	61
	62	.space 320
	63
	64	/****************************************************************
	65	* Entry point (base + 0x180)
	66	****************************************************************/
	67	_giet:
	68	mfc0 $27, $13 /* Cause Register analysis */
	69	la $26, seg_kcode_base /* $26 <= tab_causes */
	70	andi $27, $27, 0x3c
	71	addu $26, $26, $27 /* $26 <= &tab_causes[XCODE] */
	72	lw $26, ($26)
	73	jr $26 /* Jump to tab_causes[XCODE] */
	74
	75	.end _giet
	76
	77	/****************************************************************
	78	* System Call Handler
	79	*
[744]	80	* As the GIET_TSAR does not support system calls,
[622]	81	* an error message is displayed on TTY0, the program is killed.
	82	****************************************************************/
	83	.ent _sys_handler
	84
	85	_sys_handler:
	86	la $4, _msg_uknsyscall /* $4 <= message address */
	87	li $5, 36 /* $5 <= message length */
	88	li $6, 0 /* $6 <= TTY0 */
	89	jal _tty_write /* print unknown message */
	90	nop
	91
	92	la $4, _msg_epc /* $4 <= message address */
	93	li $5, 8 /* $5 <= message length */
	94	li $6, 0 /* $6 <= TTY0 */
	95	jal _tty_write /* print EPC message */
	96	nop
	97
	98	mfc0 $4, $14 /* $4 <= EPC */
[744]	99	la $5, _itoa_buffer /* $5 <= buffer address */
[622]	100	addiu $5, $5, 2 /* skip the 0x prefix */
	101	jal _itoa_hex /* fill the buffer */
	102	nop
	103
	104	la $4, _itoa_buffer /* $4 <= buffer address */
	105	li $5, 10 /* $5 <= buffer length */
	106	li $6, 0 /* $6 <= TTY0 */
	107	jal _tty_write /* print EPC value */
	108	nop
	109
[744]	110	j _exit /* end of program */
[622]	111
	112	_itoa_buffer: .ascii "0x00000000"
	113
	114	.align 2
	115
	116	.end _sys_handler
	117
	118	/****************************************************************
	119	* Interrupt Handler
	120	* This simple interrupt handler cannot be interrupted.
	121	* It uses the SoCLib VCI_XICU component.
	122	* It makes the assumption that there is only one interrupt per
	123	* entry in the interrupt vector (it can be PTI, HWI, or WTI).
[744]	124	* In case of a multi-clusters architecture, it exist one XCU
	125	* per cluster, and the base address of the ICU segment depends
[622]	126	* on both the cluster_xy and the proc_id:
	127	* - base_address = seg_xcu_base + (32local_id) + (4Gcluster_xy)
	128	* - cluster_xy = proc_id / NB_PROCS_MAX
	129	* - local_id = proc_id % NB_PROCS_MAX
	130	* If no active interrupt is found in the PRIO register,
	131	* nothing is done.
	132	* The interrupt vector (32 ISR addresses array stored at
	133	* _interrupt_vector address) is initialised with the default
	134	* ISR address. The actual ISR addresses are supposed to be written
	135	* in the interrupt vector array by the boot code.
	136	* All non persistant registers, such as $1 to $15, and $24 to $25,
	137	* as well as register $31 and EPC, are saved in the interrupted
	138	* program stack, before calling the Interrupt Service Routine.
	139	* These registers can be used by the ISR code.
	140	***************************************************************/
	141	.ent _int_handler
	142
	143	_int_handler:
	144	addiu $29, $29, -234 / stack space reservation */
	145	.set noat
	146	sw $1, 44($29) / save $1 */
	147	.set at
	148	sw $2, 45($29) / save $2 */
	149	sw $3, 46($29) / save $3 */
	150	sw $4, 47($29) / save $4 */
	151	sw $5, 48($29) / save $5 */
	152	sw $6, 49($29) / save $6 */
	153	sw $7, 410($29) / save $7 */
	154	sw $8, 411($29) / save $8 */
	155	sw $9, 412($29) / save $9 */
	156	sw $10, 413($29) / save $10 */
	157	sw $11, 414($29) / save $11 */
	158	sw $12, 415($29) / save $12 */
	159	sw $13, 416($29) / save $13 */
	160	sw $14, 417($29) / save $14 */
	161	sw $15, 418($29) / save $15 */
	162	sw $24, 419($29) / save $24 */
	163	sw $25, 420($29) / save $25 */
	164	sw $31, 421($29) / save $31 */
	165	mfc0 $27, $14
[744]	166	sw $27, 422($29) / save EPC */
[622]	167
	168	/* XICU PRIO register address computation */
	169	/* It depends on both the cluster_xy & local_id, */
	170	/* and we must use the physical address extension */
[629]	171	mfc0 $10, $15, 1 /* $10 <= proc_id */
[744]	172	andi $10, $10, 0x3FF /* at most 1024 processors */
[622]	173	li $11, NB_PROCS_MAX
	174	divu $10, $11
[629]	175	mflo $12 /* $12 <= cluster_xy */
	176	mfhi $13 /* $13 <= local_id */
	177	la $14, seg_xcu_base /* $14 <= seg_xcu_base */
[622]	178
[629]	179	li $7, 0b011110000000 /* $7 <= PRIO offset */
	180	sll $8, $13, 2 /* $8 <= local_id4 /
	181	addu $9, $7, $8 /* $9 <= PRIO offset + local_id4 /
	182	addu $26, $9, $14 /* $26 <= seg_icu_base + PRIO offset + local_id4 /
[622]	183
[629]	184	/* XCU[cluster_xy] access to get PRIO register value */
	185	mtc2 $12, $24 /* set PADDR extension */
[743]	186	lw $15, 0($26) /* $15 <= PRIO register value */
[629]	187	mtc2 $0, $24 /* reset PADDR extension */
[622]	188
[629]	189	/* test PTI, then HWI, then WTI */
	190	andi $27, $15, 0x1 /* test bit T in PRIO register */
	191	bne $27, $0, _int_PTI /* branch to PTI handler */
	192	andi $27, $15, 0x2 /* test bit W in PRIO register */
	193	bne $27, $0, _int_HWI /* branch to HWI handler */
	194	andi $27, $15, 0x4 /* test bit W in PRIO register */
	195	bne $27, $0, _int_WTI /* branch to WTI handler */
[744]	196
[622]	197	/* exit interrupt handler: restore registers */
	198	_int_restore:
	199	.set noat
[629]	200	lw $1, 4*4($29)
[622]	201	.set at
[744]	202	lw $2, 4*5($29)
	203	lw $3, 4*6($29)
[629]	204	lw $4, 4*7($29)
[744]	205	lw $5, 4*8($29)
[629]	206	lw $6, 4*9($29)
[744]	207	lw $7, 4*10($29)
[629]	208	lw $8, 4*11($29)
	209	lw $9, 4*12($29)
	210	lw $10, 4*13($29)
	211	lw $11, 4*14($29)
	212	lw $12, 4*15($29)
	213	lw $13, 4*16($29)
	214	lw $14, 4*17($29)
	215	lw $15, 4*18($29)
	216	lw $24, 4*19($29)
	217	lw $25, 4*20($29)
	218	lw $31, 4*21($29)
[744]	219	lw $27, 422($29) / get EPC */
[622]	220	addiu $29, $29, 234 / restore SP */
	221	mtc0 $27, $14 /* restore EPC */
	222	eret /* exit GIET */
	223
[629]	224	/* The PTI handler get PTI index, */
	225	/* acknowledge the PTI register */
	226	/* and call the corresponding ISR */
[622]	227	_int_PTI:
[629]	228	srl $26, $15, 6 /* $26 <= PRIO >> 6 */
	229	andi $26, $26, 0x7C /* $26 <= PTI_INDEX * 4 */
	230	addi $27, $14, 0x180 /* $27 <= &PTI_ACK[0] */
	231	add $27, $27, $26 /* $27 <= &PTI_ACK[PTI_INDEX] */
	232	lw $0, ($27) /* acknowledge XICU PTI */
	233	la $27, _interrupt_vector
	234	addu $26, $26, $27
[744]	235	lw $26, ($26) /* read ISR address */
[629]	236	jalr $26 /* call ISR */
[622]	237	nop
[629]	238	j _int_restore /* return from INT handler */
	239	nop
[622]	240
[629]	241	/* The HWI handler get HWI index */
	242	/* and call the corresponding ISR */
[622]	243	_int_HWI:
[629]	244	srl $26, $15, 14 /* $26 <= PRIO >> 14 */
	245	andi $26, $26, 0x7C /* $26 <= HWI_INDEX * 4 */
	246	la $27, _interrupt_vector
	247	addu $26, $26, $27 /* $26 <= &ISR[HWI_INDEX */
[744]	248	lw $26, ($26) /* read ISR address */
[629]	249	jalr $26 /* call ISR */
[622]	250	nop
[629]	251	j _int_restore /* return from INT handler */
	252	nop
[622]	253
[629]	254	/* The WTI handler get WTI index, */
	255	/* acknowledge the WTI register */
	256	/* and call the corresponding ISR */
[622]	257	_int_WTI:
[629]	258	srl $26, $15, 22 /* $26 <= PRIO >> 22 */
	259	andi $26, $26, 0x7C /* $26 <= WTI_INDEX * 4 */
	260	add $27, $14, $26 /* $27 <= &WTI_REG[WTI_INDEX] */
	261	lw $0, ($27) /* acknowledge XICU WTI */
[622]	262	la $27, _interrupt_vector
[629]	263	addu $26, $26, $27 /* $26 <= &ISR[WTI_INDEX] */
[744]	264	lw $26, ($26) /* read ISR address */
[629]	265	jalr $26 /* call ISR */
[622]	266	nop
[629]	267	j _int_restore /* return from INT handler */
[622]	268	nop
[744]	269
[622]	270	/* The default ISR is called when no specific ISR has been installed */
	271	/* in the interrupt vector. It simply displays a message on TTY0 */
	272
	273	isr_default:
	274	addiu $29, $29, -20 /* get space in stack */
[744]	275	sw $31, 16($29) /* to save the return address */
[622]	276	la $4, _msg_default /* $4 <= string address */
	277	addi $5, $0, 36 /* $5 <= string length */
	278	li $6, 0 /* $6 <= TTY0 */
[744]	279	jal _tty_write
	280	lw $31, 16($29) /* restore return address */
[622]	281	addiu $29, $29, 20 /* free space */
	282	jr $31 /* returns to interrupt handler */
	283
	284	/****************************************************************
	285	* Interrupt Vector Table (indexed by interrupt index)
[744]	286	* 32 words corresponding to 32 ISR addresses
[622]	287	****************************************************************/
	288	_interrupt_vector:
	289	.word isr_default /* ISR 0 */
	290	.word isr_default /* ISR 1 */
	291	.word isr_default /* ISR 2 */
	292	.word isr_default /* ISR 3 */
	293	.word isr_default /* ISR 4 */
	294	.word isr_default /* ISR 5 */
	295	.word isr_default /* ISR 6 */
	296	.word isr_default /* ISR 7 */
	297	.word isr_default /* ISR 8 */
	298	.word isr_default /* ISR 9 */
	299	.word isr_default /* ISR 10 */
	300	.word isr_default /* ISR 11 */
	301	.word isr_default /* ISR 12 */
	302	.word isr_default /* ISR 13 */
	303	.word isr_default /* ISR 14 */
	304	.word isr_default /* ISR 15 */
	305	.word isr_default /* ISR 16 */
	306	.word isr_default /* ISR 17 */
	307	.word isr_default /* ISR 18 */
	308	.word isr_default /* ISR 19 */
	309	.word isr_default /* ISR 20 */
	310	.word isr_default /* ISR 21 */
	311	.word isr_default /* ISR 22 */
	312	.word isr_default /* ISR 23 */
	313	.word isr_default /* ISR 24 */
	314	.word isr_default /* ISR 25 */
	315	.word isr_default /* ISR 26 */
	316	.word isr_default /* ISR 27 */
	317	.word isr_default /* ISR 28 */
	318	.word isr_default /* ISR 29 */
	319	.word isr_default /* ISR 30 */
	320	.word isr_default /* ISR 31 */
	321
	322	.end _int_handler
	323
	324	/****************************************************************
	325	* Exception Handler
	326	* Same code for all fatal exceptions :
	327	* Print the exception type and the values of EPC & BAR
	328	* on the TTY correspondintg to the processor PROCID,
	329	* and the user program is killed.
	330	****************************************************************/
	331	.ent _exc_handler
	332
	333	_exc_handler:
	334	_cause_bp:
	335	_cause_ukn:
	336	_cause_ri:
	337	_cause_ovf:
	338	_cause_adel:
	339	_cause_ades:
	340	_cause_ibe:
	341	_cause_dbe:
	342	_cause_cpu:
	343	mfc0 $26, $13 /* $26 <= CR */
	344	andi $26, $26, 0x3C /* $26 <= _cause_index * 4 */
	345	la $27, _mess_causes /* mess_cause table base address */
	346	addu $27, $26, $27 /* $26 <= message base address */
	347
	348	/* take the lock on TTY0 */
	349	li $4, 0
	350	jal _tty_get_lock
	351	nop
	352
	353	/* display exception type */
	354	lw $4, ($27) /* $4 <= message address */
	355	li $5, 36 /* $5 <= message length */
	356	li $6, 0 /* $6 <= TTY0 */
[744]	357	jal _tty_write
[622]	358	nop
	359
	360	/* display EPC value */
	361	la $4, _msg_epc /* $4 <= message address */
	362	li $5, 8 /* $5 <= message length */
	363	li $6, 0 /* $6 <= TTY0 */
[744]	364	jal _tty_write
[622]	365	nop
[744]	366
[622]	367	mfc0 $4, $14 /* $4 <= EPC value */
	368	la $5, _itoa_buffer /* $5 <= buffer address */
	369	addiu $5, $5, 2 /* skip 0x prefix */
	370	jal _itoa_hex /* fill buffer */
	371	nop
	372
	373	la $4, _itoa_buffer /* $4 <= buffer address */
	374	li $5, 10 /* $5 <= buffer length */
	375	li $6, 0 /* $6 <= TTY0 */
	376	jal _tty_write
	377	nop
	378
[744]	379	/* display BAR value */
[622]	380	la $4, _msg_bar /* $4 <= message address */
	381	li $5, 8 /* $5 <= message length */
	382	li $6, 0 /* $6 <= TTY0 */
	383	jal _tty_write
	384	nop
	385
	386	mfc0 $4, $8 /* $4 <= BAR value */
[744]	387	la $5, _itoa_buffer /* $5 <= buffer address */
	388	addiu $5, $5, 2 /* skip 0x prefix */
[622]	389	jal _itoa_hex /* fill buffer */
	390	nop
	391
	392	la $4, _itoa_buffer /* $4 <= message address */
	393	li $5, 10 /* $5 <= message length */
	394	li $6, 0 /* $6 <= TTY0 */
[744]	395	jal _tty_write
[622]	396	nop
	397
[744]	398
[622]	399	/* release the lock on TTY0 */
	400	li $4, 0
	401	jal _tty_get_lock
	402	nop
	403
	404	j _exit /* kill user program */
	405
	406	/* Exceptions Messages table (indexed by XCODE) */
	407	_mess_causes:
	408	.word _msg_ukncause
	409	.word _msg_ukncause
	410	.word _msg_ukncause
	411	.word _msg_ukncause
	412	.word _msg_adel
	413	.word _msg_ades
	414	.word _msg_ibe
	415	.word _msg_dbe
	416	.word _msg_ukncause
	417	.word _msg_bp
	418	.word _msg_ri
	419	.word _msg_cpu
	420	.word _msg_ovf
	421	.word _msg_ukncause
	422	.word _msg_ukncause
	423	.word _msg_ukncause
	424
	425	/********************************************************************
	426	* All messages
	427	* Messages length are fixed : 8 or 36 characters...
	428	********************************************************************/
	429	_msg_bar: .asciiz "\nBAR = "
	430	_msg_epc: .asciiz "\nEPC = "
	431	_msg_default: .asciiz "\n\n !!! Default ISR !!! \n"
	432	_msg_uknsyscall: .asciiz "\n\n !!! Undefined System Call !!! \n"
	433	_msg_ukncause: .asciiz "\n\nException : strange unknown cause\n"
	434	_msg_adel: .asciiz "\n\nException : illegal read address \n"
	435	_msg_ades: .asciiz "\n\nException : illegal write address\n"
	436	_msg_ibe: .asciiz "\n\nException : inst bus error \n"
	437	_msg_dbe: .asciiz "\n\nException : data bus error \n"
	438	_msg_bp: .asciiz "\n\nException : breakpoint \n"
	439	_msg_ri: .asciiz "\n\nException : reserved instruction \n"
	440	_msg_ovf: .asciiz "\n\nException : arithmetic overflow \n"
	441	_msg_cpu: .asciiz "\n\nException : illegal coproc access\n"
	442
	443	.end _exc_handler
	444
	445

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format