Changeset 742 for branches/fault_tolerance

Timestamp:

Jul 9, 2014, 5:36:08 PM (10 years ago)

Author:

cfuguet

Message:

Merge 'trunk' into 'fault_tolerance'

• Introducing last bugfixes of trunk into the fault_tolerance branch

Location:

branches/fault_tolerance

Files:

• modules/vci_block_device_tsar/caba/source/include/vci_block_device_tsar.h (modified) (2 diffs)
• modules/vci_cc_vcache_wrapper/caba/source/include/vci_cc_vcache_wrapper.h (modified) (1 diff)
• modules/vci_cc_vcache_wrapper/caba/source/src/vci_cc_vcache_wrapper.cpp (modified) (3 diffs)
• modules/vci_io_bridge/caba/source/src/vci_io_bridge.cpp (modified) (1 diff)
• modules/vci_mem_cache/caba/source/src/vci_mem_cache.cpp (modified) (1 diff)
• platforms/tsar_generic_iob/top.cpp (modified) (1 diff)
• platforms/tsar_generic_iob/tsar_iob_cluster/caba/source/include/tsar_iob_cluster.h (modified) (1 diff)
• platforms/tsar_generic_iob/tsar_iob_cluster/caba/source/src/tsar_iob_cluster.cpp (modified) (1 diff)
• softs/tsar_boot/conf/platform_tsar_generic_iob/defs_platform.h (modified) (1 diff)
• softs/tsar_boot/conf/platform_tsar_generic_iob/ldscript (modified) (1 diff)

branches/fault_tolerance/modules/vci_block_device_tsar/caba/source/include/vci_block_device_tsar.h

@@ -33 +33 @@
 // contain 32 bits words. It supports VCI addresss lartger than 32 bits.
 //
-// This component can perform data transfers between one single file belonging 
-// to the host system and a buffer in the memory of the virtual prototype.
-// The file name is an argument of the constructor.
+// This component can perform data transfers between one single file (belonging 
+// to the host system) and a buffer in the memory of the virtual prototype.
+// The name of the file containing the disk image is a constructor argument.
 // This component has a DMA capability, and is both a target and an initiator.
 // The block size (bytes), and the burst size (bytes) must be power of 2.
@@ -54 +54 @@
 // - BLOCK_DEVICE_SIZE          0x18 (read-only)   Number of addressable blocks.
 // - BLOCK_DEVICE_BLOCK_SIZE    0x1C (read_only)   Block size in bytes.
-// - BLOCK_DEVICE_BUFFER_EXT    0x20 (read_only)   Memory buffer base address (MSB bits)
+// - BLOCK_DEVICE_BUFFER_EXT    0x20 (read/write)  Memory buffer base address (MSB bits)
 //
 // The following operations codes are supported: 

branches/fault_tolerance/modules/vci_cc_vcache_wrapper/caba/source/include/vci_cc_vcache_wrapper.h

@@ -342 +342 @@
     bool                                m_debug_dcache_fsm;
     bool                                m_debug_cmd_fsm;
+    uint32_t                            m_previous_status;
+
 
     ///////////////////////////////

branches/fault_tolerance/modules/vci_cc_vcache_wrapper/caba/source/src/vci_cc_vcache_wrapper.cpp

@@ -476 +476 @@
 {
     // b0 : write buffer trace
+    // b1 : dump processor registers
     // b2 : dcache trace
     // b3 : icache trace
     // b4 : dtlb trace
     // b5 : itlb trace
+    // b6 : SR (ISS register 32)
 
     std::cout << std::dec << "PROC " << name() << std::endl;
@@ -509 +511 @@
         r_wbuf.printTrace((mode>>1)&1);
     }
+    if(mode & 0x02)
+    {
+        r_iss.dump();
+    }
     if(mode & 0x04)
     {
@@ -528 +534 @@
         std::cout << "  Instruction TLB" << std::endl;
         r_itlb.printTrace();
+    }
+    if(mode & 0x40)
+    {
+        uint32_t status = r_iss.debugGetRegisterValue( 32 );
+        std::cout << name();
+        if ( status != m_previous_status ) std::cout << " NEW ";
+        std::cout << " status = " << std::hex << status << " " << std::endl;
+        m_previous_status = status;
     }
 }

branches/fault_tolerance/modules/vci_io_bridge/caba/source/src/vci_io_bridge.cpp

@@ -736 +736 @@
                         {
                             assert( p_vci_tgt_iox.eop.read() and
-                                   (p_vci_tgt_iox.cmd == vci_param_int::CMD_WRITE) and
+                                   (p_vci_tgt_iox.cmd.read() == vci_param_int::CMD_WRITE) and
                             "ERROR in VCI_IOB illegal VCI WTI command from IOX network");
 

branches/fault_tolerance/modules/vci_mem_cache/caba/source/src/vci_mem_cache.cpp

@@ -3940 +3940 @@
                     if (m_debug)
                         std::cout << "  <MEMC " << name() << " WRITE_BC_DIR_INVAL> Inval DIR and register in TRT:"
-                            << " address = " << r_write_address.read() << std::endl;
+                            << " address = " << std::hex << r_write_address.read() << std::endl;
 #endif
                     r_write_fsm = WRITE_BC_CC_SEND;

branches/fault_tolerance/platforms/tsar_generic_iob/top.cpp

@@ -47 +47 @@
 // Besides the external peripherals, each cluster contains one XICU component,
 // and one multi channels DMA component.
-// The XICU component is mainly used to handle WTI IRQs, as only 2 HWI IRQs
+// The XICU component is mainly used to handle WTI IRQs, as only 5 HWI IRQs
 // are connected to XICU in each cluster:
 // - IRQ_IN[0] : MMC

branches/fault_tolerance/platforms/tsar_generic_iob/tsar_iob_cluster/caba/source/include/tsar_iob_cluster.h

@@ -71 +71 @@
     // interrupt signals
     sc_signal<bool>                       signal_false;
-    sc_signal<bool>                       signal_proc_it[8];
+    sc_signal<bool>                       signal_proc_it[16];
     sc_signal<bool>                       signal_irq_mdma[8];
     sc_signal<bool>                       signal_irq_memc;

branches/fault_tolerance/platforms/tsar_generic_iob/tsar_iob_cluster/caba/source/src/tsar_iob_cluster.cpp

@@ -639 +639 @@
     }
 
-   SC_METHOD(init);
+    SC_METHOD(init);
+
 } // end constructor
 
 tmpl(void)::init()
 {
-    signal_ram_dspin_cmd_false.write = false;
-    signal_ram_dspin_cmd_false.read = true;
-    signal_ram_dspin_rsp_false.write = false;
-    signal_ram_dspin_rsp_false.read = true;
+   signal_ram_dspin_cmd_false.write = false;
+   signal_ram_dspin_rsp_false.read  = true;
 } // end init
 

branches/fault_tolerance/softs/tsar_boot/conf/platform_tsar_generic_iob/defs_platform.h

@@ -1 @@
-#define NB_PROCS         1
-#define NB_CLUSTERS      4
+#define NB_PROCS         4
+#define NB_CLUSTERS      1
+#define CLUSTER_IO       0
 
-#define IRQ_PER_PROC     1
+#define IRQ_PER_PROC     4
 
 #define USE_IOB          1

branches/fault_tolerance/softs/tsar_boot/conf/platform_tsar_generic_iob/ldscript

@@ -9 +9 @@
 seg_reset_code_base     = 0xBFC00000; 
 
-seg_reset_stack_base    = 0x00060000; 
-seg_reset_stack_size    = 0x00090000; 
+seg_reset_stack_base    = 0x000D0000; 
+seg_reset_stack_size    = 0x00050000; 
 
 /* Grouping sections into segments */