Changeset 761 for trunk/softs/tsar_boot/README

Timestamp:

Jul 25, 2014, 10:29:56 AM (10 years ago)

Author:

cfuguet

Message:

tsar_boot: adding hard_config.h dependency in makefile

• This is to force Makefile to recompile all sources every time hard_config.h is modified.

File:

• trunk/softs/tsar_boot/README (modified) (4 diffs)

trunk/softs/tsar_boot/README

@@ -13 +13 @@
 
 conf/       Platform specific files
+
             For each platform, we must define a new directory.
             Mandatory files:
@@ -18 +19 @@
               - hard_config.h (can be generated using giet-vm genmap tool)
 
-                This file contains all physical segments addresses and sizes of the
-                hardware platform. It also contains other configuration definitions
-                as the disk controller type, mesh size, etc. Examples can be found
-                in the conf/ directory.
+                This file contains all physical segments addresses and sizes of
+                the hardware platform. It also contains other configuration
+                definitions as the disk controller type, mesh size, etc.
+                Examples can be found in the conf/ directory.
 
             Optional files:
@@ -38 +39 @@
               - USE_DT=<value>
 
-                Value can be 1 or 0.
-                If a device tree file is not used, set this flag to 0. It is
-                set by default to 1.
+                Value can be 1 or 0. If a device tree file is not used, set
+                this flag to 0. It is set by default to 1.
 
               - SYSTEM_CLK=<platform clock frequency>
@@ -62 +62 @@
     boot loader or kernel must perform stack allocation for other processors.
 
-  - Stack for processor 0 is allocated at the end of RAM segment in the
-    cluster (0,0).
+  - Stack for processor 0 is allocated at the end of RAM segment in the cluster
+    (0,0).
 
 Examples: