Changeset 792 for trunk/platforms


Ignore:
Timestamp:
Sep 9, 2014, 11:14:21 AM (10 years ago)
Author:
cfuguet
Message:

tsar_generic_leti: modifying platform to comply with the new hard_config.h

  • Peripheral base addresses are defined in the hard_config.h file.
  • Every platform parameter (X_SIZE, Y_SIZE, ...) are defined in this file too.
File:
1 edited

Legend:

Unmodified
Added
Removed

  • trunk/platforms/tsar_generic_leti/top.cpp

    r708 r792  
    11/////////////////////////////////////////////////////////////////////////
    22// File: top.cpp (for tsar_generic_leti)
    3 // Author: Alain Greiner 
     3// Author: Alain Greiner
    44// Copyright: UPMC/LIP6
    55// Date : february 2014
    … …  
    99// with the VLSI Hardware prototype developped by CEA-LETI and LIP6
    1010// in the framework of the SHARP project.
    11 // 
     11//
    1212// The processor is a MIPS32 processor wrapped in a GDB server
    1313// (this is defined in the tsar_xbar_cluster).
    14 // 
     14//
    1515// It does not use an external ROM, as the boot code is (pre)loaded
    1616// in cluster (0,0) memory at address 0x0.
    … …  
    2323// The number of clusters cannot be larger than 128.
    2424// The number of processors per cluster cannot be larger than 4.
    25 // 
     25//
    2626// Each cluster contains:
    2727// - 5 dspin_local_crossbar (local interconnect)
    … …  
    4343// that must be considered as an extension of this top.cpp file.
    4444//
    45 // Besides the hardware components in clusters, "external" peripherals 
     45// Besides the hardware components in clusters, "external" peripherals
    4646// are connected to an external IO bus (implemented as a vci_local_crossbar):
    47 // - one disk controller 
    48 // - one multi-channel ethernet controller 
     47// - one disk controller
     48// - one multi-channel ethernet controller
    4949// - one multi-channel chained buffer dma controller
    50 // - one multi-channel tty controller 
    51 // - one frame buffer controller 
     50// - one multi-channel tty controller
     51// - one frame buffer controller
    5252// - one 32 channels iopic controller
    5353//
    54 // This IOBUS is connected to the north  port of the DIR_CMD 
     54// This IOBUS is connected to the north  port of the DIR_CMD
    5555// and DIR_RSP routers, in cluster(X_SIZE-1, Y_SIZE-1).
    5656// For all external peripherals, the hardware interrupts (HWI) are
    5757// translated to write interrupts (WTI) by the iopic component:
    5858// - IOPIC HWI[1:0]     connected to IRQ_NIC_RX[1:0]
    59 // - IOPIC HWI[3:2]     connected to IRQ_NIC_TX[1:0]     
     59// - IOPIC HWI[3:2]     connected to IRQ_NIC_TX[1:0]
    6060// - IOPIC HWI[7:4]     connected to IRQ_CMA_TX[3:0]]
    6161// - IOPIC HWI[8]       connected to IRQ_BDEV
    … …  
    7373// - NB_TTY_CHANNELS  : number of TTY channels in I/O cluster (8 max)
    7474// - NB_NIC_CHANNELS  : number of NIC channels in I/O cluster (2 max)
    75 // 
     75//
    7676// Some other hardware parameters are not used when compiling the OS,
    7777// and are only defined in this top.cpp file:
    78 // - XRAM_LATENCY     : external ram latency 
     78// - XRAM_LATENCY     : external ram latency
    7979// - MEMC_WAYS        : L2 cache number of ways
    8080// - MEMC_SETS        : L2 cache number of sets
    … …  
    8585// - FBUF_X_SIZE      : width of frame buffer (pixels)
    8686// - FBUF_Y_SIZE      : heigth of frame buffer (lines)
    87 // - BDEV_IMAGE_NAME  : file pathname for block device 
     87// - BDEV_IMAGE_NAME  : file pathname for block device
    8888// - NIC_RX_NAME      : file pathname for NIC received packets
    8989// - NIC_TX_NAME      : file pathname for NIC transmited packets
    … …  
    9393// General policy for 40 bits physical address decoding:
    9494// All physical segments base addresses are multiple of 1 Mbytes
    95 // (=> the 24 LSB bits = 0, and the 16 MSB bits define the target) 
     95// (=> the 24 LSB bits = 0, and the 16 MSB bits define the target)
    9696// The (X_WIDTH + Y_WIDTH) MSB bits (left aligned) define
    9797// the cluster index, and the LADR bits define the local index:
    … …  
    127127#include "alloc_elems.h"
    128128
    129 //////////////////////////////////////////////////////////////////////////////////////////
    130 //    Parameters depending on the OS and software application         
    131 //    - path to hard_config file
    132 //    - path to binary code for the RAM loader
    133 //    - path to disk image for RAMDISK loader
    134 //    - path to disk image for IOC device
    135 //////////////////////////////////////////////////////////////////////////////////////////
    136 
    137 #define USE_GIET_VM     1
    138 #define USE_GIET_TSAR   0
    139 
    140 #if ( USE_GIET_VM and USE_GIET_TSAR )
    141 #error "Can't use Two different OS"
    142 #endif
    143 
    144 #if ( (not USE_GIET_VM) and (not USE_GIET_TSAR) )
    145 #error "You need to specify one OS"
    146 #endif
    147 
    148 #if USE_GIET_TSAR
    149 #include                         "hard_config.h"
    150 #define BINARY_PATH_FOR_LOADER   "../../softs/soft_transpose_giet/bin.soft"
    151 #define DISK_IMAGE_PATH_FOR_IOC  "../../softs/soft_transpose_giet/images.raw"
    152 #define RAMDISK_PATH_FOR_LOADER  DISK_IMAGE_PATH_FOR_IOC "@0x00800000:"
    153 #endif
    154 
    155 #if USE_GIET_VM
    156 #include                         "hard_config.h"
    157 #define BINARY_PATH_FOR_LOADER   "../../softs/tsar_boot/preloader.elf"
    158 #define DISK_IMAGE_PATH_FOR_IOC  "../../../giet_vm/hdd/virt_hdd.dmg"       
    159 #define RAMDISK_PATH_FOR_LOADER  DISK_IMAGE_PATH_FOR_IOC "@0x02000000:"
    160 #endif
     129#include "hard_config.h"
    161130
    162131///////////////////////////////////////////////////
    … …  
    176145
    177146///////////////////////////////////////////////////////////
    178 //          DSPIN parameters           
     147//          DSPIN parameters
    179148///////////////////////////////////////////////////////////
    180149
    … …  
    183152
    184153///////////////////////////////////////////////////////////
    185 //          VCI parameters           
     154//          VCI parameters
    186155///////////////////////////////////////////////////////////
    187156
    … …  
    200169
    201170/////////////////////////////////////////////////////////////////////////////////////////
    202 //    Secondary Hardware Parameters         
     171//    Secondary Hardware Parameters
    203172/////////////////////////////////////////////////////////////////////////////////////////
    204 
    205 #define RESET_ADDRESS         0x0
    206173
    207174#define MAX_TTY_CHANNELS      8
    … …  
    210177
    211178#define XRAM_LATENCY          0
    212 #define XRAM_SIZE             0x04000000    // 64 Mbytes per cluster
    213179
    214180#define MEMC_WAYS             16
    … …  
    220186#define L1_DWAYS              4
    221187#define L1_DSETS              64
    222 
    223 #define FBUF_X_SIZE           128
    224 #define FBUF_Y_SIZE           128
    225188
    226189#define NIC_MAC4              0XBABEF00D
    … …  
    235198
    236199///////////////////////////////////////////////////////////////////////////////////////
    237 //     DEBUG Parameters default values         
     200//     DEBUG Parameters default values
    238201///////////////////////////////////////////////////////////////////////////////////////
    239202
    … …  
    241204
    242205///////////////////////////////////////////////////////////////////////////////////////
    243 //     LOCAL TGTID & SRCID definition 
     206//     LOCAL TGTID & SRCID definition
    244207// For all components:  global TGTID = global SRCID = cluster_index
    245208///////////////////////////////////////////////////////////////////////////////////////
    … …  
    258221#define IOPI_SRCID            NB_PROCS_MAX + 2
    259222
    260 //////////////////////////////////////////////////////////////////////////////////////
    261 //    Physical segments definition
    262 //////////////////////////////////////////////////////////////////////////////////////
    263 // - 3 segments are replicated in all clusters
    264 // - 2 segments are only in cluster[0,0]
    265 // - 4 segments are only in cluster [X_SIZE-1,Y_SIZE]
    266 // The following values are for segments in cluster 0,
    267 // and these 32 bits values must be concatenate with the cluster
    268 // index (on 8 bits) to obtain the 40 bits address.
    269 //////////////////////////////////////////////////////////////////////////////////////
    270 
    271 // in cluster [0,0] & [X_SIZE-1,Y_SIZE]
    272 
    273 #define MTTY_BASE    0xF4000000
    274 #define MTTY_SIZE    0x00001000   // 4 Kbytes
    275 
    276 #define BDEV_BASE    0xF2000000
    277 #define BDEV_SIZE    0x00001000   // 4 Kbytes
    278 
    279 // in cluster [X_SIZE-1,Y_SIZE]
    280 
    281 #define FBUF_BASE    0xF3000000
    282 #define FBUF_SIZE    (FBUF_X_SIZE * FBUF_Y_SIZE * 2)
    283 
    284 #define MNIC_BASE    0xF7000000
    285 #define MNIC_SIZE    0x00800000   // 512 Kbytes (for 8 channels)
    286 
    287 #define CDMA_BASE    0xF8000000
    288 #define CDMA_SIZE    0x00004000 * NB_CMA_CHANNELS
    289 
    290 #define IOPI_BASE    0xF9000000
    291 #define IOPI_SIZE    0x00001000   // 4 Kbytes
    292 
    293 // replicated segments : address is extended to 40 bits by cluster_xy
    294 
    295 #define MEMC_BASE    0x00000000
    296 #define MEMC_SIZE    XRAM_SIZE
    297 
    298 #define MCFG_BASE    0xE0000000
    299 #define MCFG_SIZE    0x00001000   // 4 Kbytes
    300 
    301 #define XICU_BASE    0xF0000000
    302 #define XICU_SIZE    0x00001000   // 4 Kbytes
    303 
    304223bool stop_called = false;
    305224
    … …  
    317236   bool     trace_proc_ok     = false;      // detailed proc trace activated
    318237   size_t   trace_memc_ok     = false;      // detailed memc trace activated
    319    size_t   trace_memc_id     = 0;          // index of memc to be traced 
     238   size_t   trace_memc_id     = 0;          // index of memc to be traced
    320239   size_t   trace_proc_id     = 0;          // index of proc to be traced
    321240   uint32_t frozen_cycles     = MAX_FROZEN_CYCLES;
    322    char     soft_name[256]    = BINARY_PATH_FOR_LOADER;
    323    char     disk_name[256]    = DISK_IMAGE_PATH_FOR_IOC;
    324    char     ramdisk_name[256] = RAMDISK_PATH_FOR_LOADER;
     241   char     soft_name[256]    = "soft.elf";
     242   char     disk_name[256]    = "disk.img";
     243   char     ramdisk_name[256] = "disk.img@0x02000000:";
    325244   struct   timeval t1,t2;
    326245   uint64_t ms1,ms2;
    … …  
    364283         else if ((strcmp(argv[n], "-SOFT") == 0) && ((n + 1) < argc))
    365284         {
    366             strcpy(soft_name, argv[n + 1]); 
     285            strcpy(soft_name, argv[n + 1]);
    367286         }
    368287         else if ((strcmp(argv[n], "-DISK") == 0) && ((n + 1) < argc))
    … …  
    372291         else if ((strcmp(argv[n], "-RAMDISK") == 0) && ((n + 1) < argc))
    373292         {
    374             strcpy(ramdisk_name, argv[n + 1]); 
     293            strcpy(ramdisk_name, argv[n + 1]);
    375294         }
    376295         else if ((strcmp(argv[n], "-THREADS") == 0) && ((n + 1) < argc))
    … …  
    404323
    405324    // checking hardware parameters
    406     assert( ((X_SIZE==1) or (X_SIZE==2) or (X_SIZE==4) or (X_SIZE==8) or (X_SIZE==16)) and
     325    assert( ((X_SIZE==1) or (X_SIZE==2) or (X_SIZE==4) or (X_SIZE==8) or
     326             (X_SIZE==16)) and
    407327            "Illegal X_SIZE parameter" );
    408328
    409     assert( ((Y_SIZE==1) or (Y_SIZE==2) or (Y_SIZE==4) or (Y_SIZE==8)) and 
     329    assert( ((Y_SIZE==1) or (Y_SIZE==2) or (Y_SIZE==4) or (Y_SIZE==8)) and
    410330            "Illegal Y_SIZE parameter" );
    411331
    … …  
    427347    assert( (X_WIDTH == 4) and (Y_WIDTH == 4) and
    428348            "ERROR: you must have X_WIDTH == Y_WIDTH == 4");
    429  
     349
    430350    std::cout << std::endl;
    431351
    … …  
    483403   ///////////////////////////////////////
    484404
    485    MappingTable maptabd(vci_address_width, 
    486                         IntTab(X_WIDTH + Y_WIDTH, 16 - X_WIDTH - Y_WIDTH), 
    487                         IntTab(X_WIDTH + Y_WIDTH, vci_srcid_width - X_WIDTH - Y_WIDTH), 
     405   MappingTable maptabd(vci_address_width,
     406                        IntTab(X_WIDTH + Y_WIDTH, 16 - X_WIDTH - Y_WIDTH),
     407                        IntTab(X_WIDTH + Y_WIDTH, vci_srcid_width - X_WIDTH - Y_WIDTH),
    488408                        0x00FF000000ULL);
    489409
    … …  
    498418         std::ostringstream    si;
    499419         si << "seg_xicu_" << x << "_" << y;
    500          maptabd.add(Segment(si.str(), XICU_BASE + offset, XICU_SIZE,
     420         maptabd.add(Segment(si.str(), SEG_XCU_BASE + offset, SEG_XCU_SIZE,
    501421                  IntTab(cluster(x,y),XICU_TGTID), false));
    502422
    503423         std::ostringstream    sd;
    504424         sd << "seg_mcfg_" << x << "_" << y;
    505          maptabd.add(Segment(sd.str(), MCFG_BASE + offset, MCFG_SIZE,
     425         maptabd.add(Segment(sd.str(), SEG_MMC_BASE + offset, SEG_MMC_SIZE,
    506426                  IntTab(cluster(x,y),MEMC_TGTID), false));
    507427
    508428         std::ostringstream    sh;
    509429         sh << "seg_memc_" << x << "_" << y;
    510          maptabd.add(Segment(sh.str(), MEMC_BASE + offset, MEMC_SIZE,
     430         maptabd.add(Segment(sh.str(), SEG_RAM_BASE + offset, SEG_RAM_SIZE,
    511431                  IntTab(cluster(x,y),MEMC_TGTID), true));
    512432      }
    … …  
    514434
    515435   // segments for peripherals in cluster(0,0)
    516    maptabd.add(Segment("seg_tty0", MTTY_BASE, MTTY_SIZE,
     436   maptabd.add(Segment("seg_tty0", SEG_TTY_BASE, SEG_TTY_SIZE,
    517437               IntTab(cluster(0,0),MTTY_TGTID), false));
    518438
    519    maptabd.add(Segment("seg_ioc0", BDEV_BASE, BDEV_SIZE,
     439   maptabd.add(Segment("seg_ioc0", SEG_IOC_BASE, SEG_IOC_SIZE,
    520440               IntTab(cluster(0,0),BDEV_TGTID), false));
    521441
    … …  
    524444   offset = ((sc_uint<vci_address_width>)cluster(X_SIZE-1,Y_SIZE)) << 32;
    525445
    526    maptabd.add(Segment("seg_mtty", MTTY_BASE + offset, MTTY_SIZE,
     446   maptabd.add(Segment("seg_mtty", SEG_TTY_BASE + offset, SEG_TTY_SIZE,
    527447               IntTab(cluster(X_SIZE-1, Y_SIZE),MTTY_TGTID), false));
    528448
    529    maptabd.add(Segment("seg_fbuf", FBUF_BASE + offset, FBUF_SIZE,
     449   maptabd.add(Segment("seg_fbuf", SEG_FBF_BASE + offset, SEG_FBF_SIZE,
    530450               IntTab(cluster(X_SIZE-1, Y_SIZE),FBUF_TGTID), false));
    531451
    532    maptabd.add(Segment("seg_bdev", BDEV_BASE + offset, BDEV_SIZE,
     452   maptabd.add(Segment("seg_bdev", SEG_IOC_BASE + offset, SEG_IOC_SIZE,
    533453               IntTab(cluster(X_SIZE-1, Y_SIZE),BDEV_TGTID), false));
    534454
    535    maptabd.add(Segment("seg_mnic", MNIC_BASE + offset, MNIC_SIZE,
     455   maptabd.add(Segment("seg_mnic", SEG_NIC_BASE + offset, SEG_NIC_SIZE,
    536456               IntTab(cluster(X_SIZE-1, Y_SIZE),MNIC_TGTID), false));
    537457
    538    maptabd.add(Segment("seg_cdma", CDMA_BASE + offset, CDMA_SIZE,
     458   maptabd.add(Segment("seg_cdma", SEG_CMA_BASE + offset, SEG_CMA_SIZE,
    539459               IntTab(cluster(X_SIZE-1, Y_SIZE),CDMA_TGTID), false));
    540460
    541    maptabd.add(Segment("seg_iopi", IOPI_BASE + offset, IOPI_SIZE,
     461   maptabd.add(Segment("seg_iopi", SEG_PIC_BASE + offset, SEG_PIC_SIZE,
    542462               IntTab(cluster(X_SIZE-1, Y_SIZE),IOPI_TGTID), false));
    543463
    … …  
    548468    /////////////////////////////////////////////////
    549469
    550     MappingTable maptabx(vci_address_width, 
    551                          IntTab(X_WIDTH+Y_WIDTH), 
    552                          IntTab(X_WIDTH+Y_WIDTH), 
     470    MappingTable maptabx(vci_address_width,
     471                         IntTab(X_WIDTH+Y_WIDTH),
     472                         IntTab(X_WIDTH+Y_WIDTH),
    553473                         0x00FF000000ULL);
    554474
    … …  
    556476    {
    557477        for (size_t y = 0; y < (Y_SIZE) ; y++)
    558         { 
     478        {
    559479            sc_uint<vci_address_width> offset;
    560             offset = (sc_uint<vci_address_width>)cluster(x,y) 
     480            offset = (sc_uint<vci_address_width>)cluster(x,y)
    561481                      << (vci_address_width-X_WIDTH-Y_WIDTH);
    562482
    … …  
    564484            sh << "x_seg_memc_" << x << "_" << y;
    565485
    566             maptabx.add(Segment(sh.str(), MEMC_BASE + offset,
    567                      MEMC_SIZE, IntTab(cluster(x,y)), false));
     486            maptabx.add(Segment(sh.str(), SEG_RAM_BASE + offset,
     487                     SEG_RAM_SIZE, IntTab(cluster(x,y)), false));
    568488        }
    569489    }
    … …  
    669589   VciSignals<vci_param_int>    signal_vci_ini_iopi("signal_vci_ini_iopi");
    670590
    671    VciSignals<vci_param_int>*   signal_vci_ini_proc = 
     591   VciSignals<vci_param_int>*   signal_vci_ini_proc =
    672592       alloc_elems<VciSignals<vci_param_int> >("signal_vci_ini_proc", NB_PROCS_MAX );
    673593
    … …  
    683603   VciSignals<vci_param_int>    signal_vci_cmd_to_noc("signal_vci_cmd_to_noc");
    684604   VciSignals<vci_param_int>    signal_vci_cmd_from_noc("signal_vci_cmd_from_noc");
    685    
     605
    686606   ////////////////////////////
    687    //      Loader   
     607   //      Loader
    688608   ////////////////////////////
    689609
    690 #if USE_IOC_RDK
     610#if USE_RAMDISK
    691611   soclib::common::Loader loader( soft_name, ramdisk_name );
    692612#else
    … …  
    726646#endif
    727647            std::cout << std::endl;
    728             std::cout << "Cluster_" << std::dec << x << "_" << y 
     648            std::cout << "Cluster_" << std::dec << x << "_" << y
    729649                      << " with cluster_xy = " << std::hex << cluster(x,y) << std::endl;
    730650            std::cout << std::endl;
    … …  
    764684                frozen_cycles,
    765685                trace_from,
    766                 trace_proc_ok, 
     686                trace_proc_ok,
    767687                trace_proc_id,
    768                 trace_memc_ok, 
     688                trace_memc_ok,
    769689                trace_memc_id
    770690            );
    … …  
    785705    // but the crossbar has (NB_PROCS_MAX + 3) intiators and
    786706    // 8 targets, in order to use the same SRCID and TGTID space
    787     // (same mapping table for the internal components, 
    788     //  and for the external peripherals) 
     707    // (same mapping table for the internal components,
     708    //  and for the external peripherals)
    789709    //////////////////////////////////////////////////////////////////
    790710
    … …  
    792712    std::cout << " Building IO cluster (external peripherals)" << std::endl;
    793713    std::cout << std::endl;
    794  
     714
    795715    size_t cluster_io = cluster(X_SIZE-1, Y_SIZE);
    796716
    797     //////////// vci_local_crossbar 
     717    //////////// vci_local_crossbar
    798718    VciLocalCrossbar<vci_param_int>*
    799719    iobus = new VciLocalCrossbar<vci_param_int>(
    … …  
    805725                BDEV_TGTID );                 // default target index
    806726
    807     //////////// vci_framebuffer                       
     727    //////////// vci_framebuffer
    808728    VciFrameBuffer<vci_param_int>*
    809729    fbuf = new VciFrameBuffer<vci_param_int>(
    … …  
    813733                FBUF_X_SIZE, FBUF_Y_SIZE );
    814734
    815     ////////////  vci_block_device               
     735    ////////////  vci_block_device
    816736    VciBlockDeviceTsar<vci_param_int>*
    817737    bdev = new VciBlockDeviceTsar<vci_param_int>(
    … …  
    824744                64 );                         // burst size
    825745
    826     //////////// vci_multi_nic               
     746    //////////// vci_multi_nic
    827747    VciMultiNic<vci_param_int>*
    828748    mnic = new VciMultiNic<vci_param_int>(
    … …  
    836756                NIC_TX_NAME );
    837757
    838     ///////////// vci_chbuf_dma                   
     758    ///////////// vci_chbuf_dma
    839759    VciChbufDma<vci_param_int>*
    840760    cdma = new VciChbufDma<vci_param_int>(
    … …  
    844764                IntTab(cluster_io, CDMA_TGTID),
    845765                64,                          // burst size
    846                 NB_CMA_CHANNELS ); 
     766                NB_CMA_CHANNELS );
    847767
    848768    ////////////// vci_multi_tty
    … …  
    855775    }
    856776
    857     VciMultiTty<vci_param_int>* 
     777    VciMultiTty<vci_param_int>*
    858778    mtty = new VciMultiTty<vci_param_int>(
    859779                "mtty",
    … …  
    869789                IntTab(cluster_io, IOPI_SRCID),
    870790                IntTab(cluster_io, IOPI_TGTID),
    871                 32,
    872                 5000 );
    873 
    874     ////////////// vci_dspin wrappers
     791                32 );
     792
     793    ////////////// vci_dspin wrappers
    875794    VciDspinTargetWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>*
    876795    wt_iobus = new VciDspinTargetWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>(
    … …  
    884803
    885804    ///////////////////////////////////////////////////////////////
    886     //     Net-list 
     805    //     Net-list
    887806    ///////////////////////////////////////////////////////////////
    888807
    889     // iobus 
    890     iobus->p_clk                       (signal_clk); 
     808    // iobus
     809    iobus->p_clk                       (signal_clk);
    891810    iobus->p_resetn                    (signal_resetn);
    892811
    … …  
    1049968        }
    1050969    }
    1051     std::cout << std::endl << "Horizontal connections done" << std::endl;   
     970    std::cout << std::endl << "Horizontal connections done" << std::endl;
    1052971
    1053972    // Inter Clusters vertical connections
    1054     if (Y_SIZE > 1) 
     973    if (Y_SIZE > 1)
    1055974    {
    1056975        for (size_t y = 0; y < (Y_SIZE-1); y++)
    … …  
    11981117    }
    11991118
    1200     // set default values for VCI signals connected to unused ports on iobus 
     1119    // set default values for VCI signals connected to unused ports on iobus
    12011120    signal_vci_tgt_memc.rspval = false;
    12021121    signal_vci_tgt_xicu.rspval = false;
    … …  
    12061125    signal_resetn = true;
    12071126
    1208     if (gettimeofday(&t1, NULL) != 0) 
     1127    if (gettimeofday(&t1, NULL) != 0)
    12091128    {
    12101129        perror("gettimeofday");
    … …  
    12331152        {
    12341153
    1235             if (gettimeofday(&t2, NULL) != 0) 
     1154            if (gettimeofday(&t2, NULL) != 0)
    12361155            {
    12371156                perror("gettimeofday");
    … …  
    12411160            ms1 = (uint64_t) t1.tv_sec * 1000ULL + (uint64_t) t1.tv_usec / 1000;
    12421161            ms2 = (uint64_t) t2.tv_sec * 1000ULL + (uint64_t) t2.tv_usec / 1000;
    1243             std::cerr << "platform clock frequency " 
     1162            std::cerr << "platform clock frequency "
    12441163                      << (double) 5000000 / (double) (ms2 - ms1) << "Khz" << std::endl;
    12451164
    1246             if (gettimeofday(&t1, NULL) != 0) 
     1165            if (gettimeofday(&t1, NULL) != 0)
    12471166            {
    12481167                perror("gettimeofday");
    … …  
    12911210                clusters[x][y]->signal_vci_tgt_memc.print_trace(smemc.str());
    12921211                clusters[x][y]->signal_vci_xram.print_trace(sxram.str());
    1293             }   
     1212            }
    12941213
    12951214            // trace coherence signals
    … …  
    13091228            // clusters[0][1]->xbar_m2p->print_trace();
    13101229            // clusters[1][1]->xbar_m2p->print_trace();
    1311        
     1230
    13121231            // trace router(s) m2p
    13131232            // clusters[0][0]->router_m2p->print_trace();
    … …  
    13151234            // clusters[0][1]->router_m2p->print_trace();
    13161235            // clusters[1][1]->router_m2p->print_trace();
    1317        
     1236
    13181237            // trace external ioc
    13191238            bdev->print_trace();
    … …  
    13351254        {
    13361255            // trace BDV interrupts events
    1337             if ( signal_irq_bdev.read() != prev_irq_bdev ) 
     1256            if ( signal_irq_bdev.read() != prev_irq_bdev )
    13381257            {
    13391258                prev_irq_bdev = signal_irq_bdev.read();
    … …  
    13411260                          << " at cycle " << n << std::endl;
    13421261            }
    1343        
     1262
    13441263            // trace TTY interrupts events
    13451264            for ( size_t x = 0 ; x < 8 ; x++ )
    13461265            {
    1347                 if ( signal_irq_mtty_rx[x].read() != prev_irq_mtty_rx[x] ) 
     1266                if ( signal_irq_mtty_rx[x].read() != prev_irq_mtty_rx[x] )
    13481267                {
    13491268                    prev_irq_mtty_rx[x] = signal_irq_mtty_rx[x].read();
    1350                     std::cout << std::dec << "@@@ IRQ_MTTY["<<x<<"] = " 
     1269                    std::cout << std::dec << "@@@ IRQ_MTTY["<<x<<"] = "
    13511270                              << signal_irq_mtty_rx[x].read()
    13521271                              << " at cycle " << n << std::endl;
    … …  
    13601279            {
    13611280                if ( clusters[x][y]->signal_proc_irq[i] != prev_irq_proc[x][y][i] )
    1362                 { 
     1281                {
    13631282                    prev_irq_proc[x][y][i] = clusters[x][y]->signal_proc_irq[i];
    13641283                    std::cout << std::dec << "@@@ IRQ_PROC["<<x<<","<<y<<","<<i<<"] = "
    … …  
    13871306}
    13881307
    1389 
    1390 void handler(int dummy = 0)
     1308void handler(int dummy = 0)
    13911309{
    13921310   stop_called = true;
Note: See TracChangeset for help on using the changeset viewer.